Sanyo VCC-HD5400 VCC-HD5400 Setup and Summary Manual - Page 15

Specifications ■ Camera Image pickup device 1/2.5" CMOS sensor Effective pixels 16:9 1920 (H) × 1080 (V), 4:3 1600 (H) × 1200 (V) Lowest image illumination 50IRE: 2.0 lx (F1.8, in color mode with high gain) 50IRE: 0.1 lx (F1.8 in black-and-white mode with high gain) Video S/N ratio Lens 50 dB or higher (when AGC is 'OFF') Focal Length: f=6.3 - 63 mm, F number: F1.8 - 2.5 Optical zoom 10x, electronic zoom 16x (up to 160x when used in combination with the optical zoom) Rotational scope Rotation speed Preset position Pan: 360° endless pan Tilt: -20 to +200° Pan: Max. 350°/sec Tilt: Max. 350°/sec (0.1° - 120°/ sec for manual operation) Max. 256 Auto mode Sequential, auto pan, tour, automatic return Privacy mask Motion sensor Auto pursuit ON/OFF, up to 32 positions ON (detection area setting, video analytics)/OFF, face detection function ON/OFF Sway compensation ON/OFF Language selection English, French, German, Spanish, Japanese For further details on the specifications of the camera, refer to the electronic manual. ■ I/O Video output LAN EX-HDD Connector SD Card Slot Alarm input Alarm output Audio input/output Communication method Protocol Baud Rate Address HD Output: HDMI terminal (TYPE C) Monitor output: BNC terminal (MONITOR OUT) 10BASE-T/100BASE-TX (RJ-45 connector) For connecting an external hard disk drive case 1 (SDHC compliant, max. 32 GB supported) 4 (NO/NC), also used for switching between day and night modes 2 (NO/NC, 16V, 150 mA, open collector) Audio input (white: 3.5-mm mini jack) Audio output (black: 3.5-mm mini jack) RS-485 SSP, PELCO-D 2400, 4800, 9600, 19200 1 - 255 (sanyo SSP: 1 to 127) ■ Recording media SD memory card External HDD Normal recording, alarm recording, backup video recording in event of a network failure, log information For the recommended SD memory cards or hard disks, visit our website. http://www.sanyosecurity.com/ 14