Sanyo VCC-HD5400 VCC-HD5400 Setup and Summary Manual - Page 5
SD memory card, External HDD, Installing Recording Media - firmware
UPC - 086483075698
View all Sanyo VCC-HD5400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
ᶏ Side Cover Name and Function of Each Component Fall-prevention screw ⦈ SD Card slot ⦉ Power indicator This indicator lights up when the camera is powered on. When the camera is on, this indicator blinks to indicate the following camera statuses: • Deactivation of recording to SD memory card in progress • Firmware update in progress • An SD memory card error occurred (Fast blink) ⦊ SD CARD button • Disable recording: The power indicator blinks when this button is pressed, and stays lit when the SD memory card is prepared to be removed. • Enable recording: The power indicator blinks when this button is pressed, and stays lit when the SD memory card is recognized. Installing Recording Media • Before you insert an SD card, be sure to turn off the camera. • If you insert an SD card, format it via network operation on the SD/HDD screen. ( Electronic manual) ■ SD memory card • How to insert the SD card To record live video on a SD memory card, open the cover as shown below and insert the card into the card slot until you hear a click. Power indicator • How to remove the SD card Press the SD CARD button and, after confirming that the indicator lamp has stopped blinking and now stays lit, take out the SD card. ■ External HDD SD CARD button Use the optional hard disk case (VA-HDC4000) to install the SANYO-specified 2.5" SATA hard disk drive and connect the drive to the EX-HDD terminal. For detailed information on the hard disk case including hard disk installation, refer to the instruction manual supplied with the hard disk case. 4