Sanyo VPC HD1 Instruction Manual, VPC-HD1010EX
Sanyo VPC HD1 - Xacti Camcorder - 720p Manual
 |
UPC - 086483059766
View all Sanyo VPC HD1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sanyo VPC HD1 manual content summary:
- Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 1
INSTRUCTION MANUAL Digital Movie Camera VPC-HD1010EX VPC-HD1010 VPC-HD1010GX Important note This manual explains how to safely operate the VPC-HD1010EX, VPC-HD1010 and VPC-HD1010GX. Any information regarding only one of these products will be labeled as such. Please read these instructions - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 2
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to and used in accordance with the instructions, may cause harmful interference to radio Conformity Model number: VPC-HD1010 Trade Name: SANYO Responsible party: SANYO FISHER COMPANY Address - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 3
FOR CANADIAN USERS i This Class B digital apparatus complies with Canadian ICES-003. FOR EU USERS Note: iThis symbol mark and recycle system apply only to EU countries and do not apply to countries in other areas of the world. Your SANYO product is designed and manufactured with high quality - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 4
in this manual HINT Points giving some extended instructions or special points to pay attention to. CAUTION Points that require special attention. (page xx) Refer to the page indicated for detailed information. You may find the answers to questions or problems concerning camera operation in - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 5
. h An SD Memory Card is not included with your camera. Please purchase a commercially sold card. h In this manual, the SD Memory Card is referred to as the "card". Card slot cover Card slot SD Memory Card 2 Connect the AC adaptor to the camera. DC IN terminal Supplied AC adaptor DC IN terminal - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 6
test shot to confirm that your camera is set up and ready to go i Sanyo declines any claim for compensation for recorded contents etc. in case of photographing or recording failure due to a chance camera To record a video clip: Monitor h Press the [ ] button to begin recording a video clip. h - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 7
clip playback. h Set the REC/PLAY switch to REC. REC/PLAY switch Set to PLAY SAVE SET button PLAY Video clip pattern When you are finished using the camera... Press the ON/OFF button for at least 1 second to turn the - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 8
SAVE Burn your recorded video clips onto a DVD (Windows Vista) Using the supplied CD-ROM (Sanyo Software Pack), you can store your captured images on a DVD. Detailed information about the Sanyo Software Pack can be found on page 4 in the Sanyo Software Pack INSTRUCTION MANUAL. Install application - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 9
USB interface cable to connect your camera to the computer. 2 Turn on the camera. h The USB Connection Screen appears on the camera's monitor. USB CONNECTION COMPUTER PRINTER CANCEL CANCEL OK To power outlet To USB terminal on the docking station To USB connector on the computer Supplied - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 10
disk. h The data recorded with your camera are stored in the following folder. You can specify the folder on the hard disk to which to copy the files. XACTI (E:)\DCIM\****SANYO (**** represents numbers [page 11 in the Sanyo Software Pack INSTRUCTION MANUAL]). * The drive name (E:) may be different - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 11
Burn video clips onto a DVD (For Windows Vista users) Here's how to write your recorded data onto a DVD in the mpeg2 format. For information on other operations, - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 12
SHOOT, PLAY BACK AND SAVE 3 Under the "What would you like to do?" heading, point to [Make DVD] and click on [DVD-video]. h The Hints window opens, in which you can find an explanation of each screen. h From the [Show hints when moving - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 13
5 Under the "What would you like to do?" heading, click [Add video files]. h The window to select files to burn to DVD opens. 6 Click on a file to burn to DVD. h Click on the - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 14
SHOOT, PLAY BACK AND SAVE h When you double-click a file in the "Content" field, the window to play the file appears. Click the [Next] button when you want to return to the previous window. 1 Right-click on the file in the "Content" - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 15
9 Click on one of the designs under "Templates", and then click the [Next] button. h A preview of the selected design is shown. English xiv - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 16
SHOOT, PLAY BACK AND SAVE 10 Click the [Next] button. h The window to configure the DVD burn setup opens. xv English - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 17
11 Click the [Burn] button. hDisk writing begins. hThe process status is shown in the "Recording progress" field. hWhen the burn process is completed, a screen asking if you would like to save a log file of the burn process appears. 12 Click the [Yes] button. h Enter a name for the log file. 13 - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 18
SHOOT, PLAY BACK AND SAVE 14 Click the [Finish] button. h A screen asking if you would like to save the project appears. 15 Click the [Yes] button. h Enter a name for the project file. 16 Click the [Save] button. h Nero Vision Essentials ends. xvii English - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 19
that? The convenient accessories not only let you immediately view images captured with the camera, but you can also upload images to your computer and create your original DVDs. Read the following explanations to find out how you can fully enjoy your camera's digital movie feature. English xviii - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 20
19 Lots of accessories for optimal use of your captured images ....... 20 SYSTEM MAP 21 „ SETUP PARTS NAMES 22 Camera 22 Docking station 25 Remote control unit 26 INSTALLING THE CARD 27 PREPARING THE DOCKING STATION 29 PREPARING THE REMOTE CONTROL UNIT 30 Prepare the battery 30 How to - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 21
save one frame from a video clip as a still image 85 SLIDESHOW PLAYBACK 86 PLAYBACK VOLUME 87 DELETING FILES 88 PLAYBACK MODES 90 9-image display playback 90 Selecting the playback folder 91 Magnifying (zooming in) the image 92 „ NORMAL SHOOTING RECORDING SIZE 93 Movies 93 Still images 94 - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 22
OPERATION 102 SELF-TIMER 103 MOTION COMPENSATION (IMAGE STABILIZER 105 Compensate for camera shake when recording movies 105 Compensate for camera shake when shooting still images ........ 105 FOCUS RANGE 107 How to use the manual focus 108 FOCUS MODE 109 LIGHT-MEASURING MODE SETTING 110 ISO - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 23
NO. MEMORY 167 FORMATTING A CARD 170 RESETTING THE CAMERA SETTINGS 172 CHECKING THE REMAINING CARD MEMORY 173 Checking the remaining number of images and video recording time 173 For audio recordings 173 CHECKING THE REMAINING BATTERY PACK CHARGE 175 „ OTHER DEVICES AND CONNECTIONS CONNECTING - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 24
CONTENTS „ APPENDICES COMMONLY ASKED QUESTIONS 194 TROUBLESHOOTING 202 Camera 202 Docking station 212 Notes regarding the Scene Select feature and filters 214 SPECIFICATIONS 216 Camera 216 Camera connectors 220 Battery life 221 Possible No. of Images/Possible Shooting Time/ Possible - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 25
on page 155 Capture fast-moving subjects • "SCENE SELECT" (sports mode) on page 99 Suppress camera shake effect • "Compensate for camera shake when recording movies" on page 105 • "Compensate for camera shake when shooting still images" on page 105 Shoot in dark conditions • "EXPOSURE COMPENSATION - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 26
SENSITIVITY MODE" on page 119 Measure the brightness of a specific area • "LIGHT-MEASURING MODE SETTING" on page 110 Adjust the camera's sensitivity • "ISO SENSITIVITY" on page 111 For a more precise exposure setting • "EXPOSURE SETTING" (manual exposure control) on page 114 Change the color of - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 27
Basic operation Convenient functions Additional functions Getting started viewing images • "PLAYING BACK VIDEO CLIPS AND STILL IMAGES" on page 83 Adjust the speaker volume • "PLAYBACK the TV system • "TV OUTPUT SETTING" on page 160 How to use Xacti Library • "Xacti Library" on page 182 English 8 - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 28
on page 124 Format a card • "FORMATTING A CARD" on page 170 Delete a part of a video clip and join video clips • "EDITING VIDEO CLIPS" on page 135 Specify the number of prints, index print, and date imprint • "PRINTING INSTRUCTIONS" on page 125 View the settings that were in effect when the image - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 29
(Windows Vista)" on page vii Playback • "About video clip files recorded with this camera" on page 13 in the Sanyo Software Pack INSTRUCTION MANUAL Using as a webcam • "Using as a PC camera" on page 16 in the Sanyo Software Pack INSTRUCTION MANUAL Record an image of the computer screen • "SCREEN - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 30
1 i Docking station (pages 25 and 29): 1 i Dedicated S-AV interface cable (pages 177 and 178): 1 i Dedicated USB interface cable (page 6 in the Sanyo Software Pack INSTRUCTION MANUAL): 1 i Dedicated component cable (page 179): 1 i HDMI cable (page 180): 1 Included with model VPC-HD1010EX. Not - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 31
special handling may apply. The lithium battery used in this camera contains perchlorate material, which may require MANUAL" (safety precautions booklet) Please read this booklet carefully before using the camera. i Xacti Library Instruction Manual i Quick Guide Included with model VPC-HD1010GX - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 32
CHECKING THE INCLUDED ACCESSORIES How to use the accessories k Handstrap k Lens cap 1 3 5 13 English 2 4 1 Depress 2 Pull - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 33
k Soft case English 14 - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 34
THE INCLUDED ACCESSORIES Separately sold accessories i HDMI cable VCP-HDMI01 Cable for connecting to the HDMI terminal on the docking station. i Lithium-ion Battery Charger VAR-L50 Battery charger for the supplied or separately sold lithium-ion battery pack (DB-L50A). i Lithium-ion Battery DB-L50 - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 35
can be used with this camera The type of card that can be inserted into and used with this camera is: i SD Memory Card i SDHC Memory Card What "card" means in this manual i In this manual, SD Memory Cards and SDHC Memory Cards that can be used in this digital camera are referred to as "card - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 36
capture full high definition (full HD) 1920 × 1080-pixel, 60 fields/s video clips. Also, the H.264/MPEG-4 AVC standard is used for formatting video files. You get both compact file size and high picture quality in one high-performance camera. * "Full High Definition" by SANYO Digital Movie Camera - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 37
shooting/playback modes: the "SIMPLE mode" for users new to the camera, and the "NORMAL mode" for full use of all the camera's many features and functions. Example: Select movie and photo size EXIT OK 1 RECORDING MENU 2 3 MOVIE PHOTO SCENE SELECT 8M 1 FILTER 2 FLASH 3 SELF-TIMER EXIT OK - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 38
Library feature (page 182) The Xacti Library feature feature allows you to save files recorded with your camera to a large-capacity hard disk without using a computer and play them back on your TV. No computer operation is involved. You can view full highdefinition images right on your TV screen - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 39
images (pages 21 and 4 in the Sanyo Software Pack INSTRUCTION MANUAL) Use the accessory cables to view images on a TV or computer. Or connect the camera directly to a printer to make prints of your photos. And with the software in the supplied CD-ROM (Sanyo Software Pack), you can create your - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 40
connect the camera to various devices to expand its capabilities. Remote control TV unit Computer Hard disc Docking station Printer i Card reader i DPOF-compatible printer i Photo shop Separately sold or commercially available SD Memory Card AC adaptor (supplied) Battery charger (optional - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 41
SETUP SETUP PARTS NAMES Camera Front Flash i Extends when the flash button [?] is pressed. Shoe cover Strap holder Flash button [?] Battery cover lock Battery cover Flash unit Lens Remote control sensor SETUP Mic/headphones teminal cover [MIC/ ] Monitor unit Stereo microphone English 22 - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 42
PARTS NAMES 23 English - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 43
SETUP Rear Speaker Monitor Zoom switch Multi-indicator PHOTO VIEW button Blue LED indicator REC/PLAY switch SIMPLE/NORMAL switch ON/OFF button [ ] button [ ] button MENU button SET button Card slot cover DC IN terminal cover Bottom Docking station terminal Tripod stand hole English 24 - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 44
PARTS NAMES Docking station Front Rear Operation mode button Docking station terminal 25 English DC IN terminal USB terminal COMPONENT/AV terminal HDMI terminal - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 45
as toggling SET button to the right 0 Works the same as toggling SET button down A ON/OFF button h Works only when the camera is set in the docking station. 1 [ ] button 2 [ ] button 3 Works the same as pushing zoom switch toward the [W] ([P]) side 4 Works the same as pushing - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 46
INSTALLING THE CARD Be sure to format a newly purchased card or one that was used in another device before using it in your camera (page 170). If an unformatted card is used, the card itself may become unusable. 1 Open the card slot cover, and insert the card in the - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 47
SETUP h To remove the card, press it in, and then release. The card will protrude slightly, and you can then pull it out. CAUTION Do not attempt to forcibly remove the card i Doing so may damage the card or the stored files. If the multi-indicator is flashing red... i Never - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 48
PREPARING THE DOCKING STATION The supplied docking station is used to connect your camera to a computer, printer or TV, as well as to charge the battery pack installed in the camera. 1 Connect the docking station to a power outlet. h Use the supplied AC adaptor and power cord. Docking station To - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 49
control unit can be used to take pictures and play them back with the camera. Prepare the battery A battery is already installed in the remote control unit at the time of purchase. 1 Pull out the battery insulating sheet. h The remote control unit becomes operable when the insulating sheet is - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 50
remote control unit can be used at an angle that is displaced 15 degrees horizontally from the remote control sensor on the front of the camera, at a distance of up to 7 meters (22.97 ft.). When operating the remote control unit, remove any object that may obstruct the path between it - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 51
sensor on the docking station. 2 Simultaneously press the MENU button and the [ least 3 seconds. ] button for at 3 Press a button on the remote control unit and check that the camera is receiving correctly. h The remote control codes are retained even if the batteries in the remote control - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 52
a power outlet if the docking station or the AC adaptor is used. Charging the battery pack 1 While pressing the battery cover lock, slide it (1), and pull out the battery cover toward the bottom of the camera (2). h The battery cover comes off. 1 Battery cover lock 2 Battery cover 33 English - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 53
SETUP 2 Insert the battery pack. h Take care that it is positioned correctly. 3 Replace the battery cover. h Raise the edge of the battery pack to remove it. 4 Prepare the docking station (page 29). Battery pack English 34 - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 54
the indicator turns off. h If the multi-indicator flashes red, it indicates that the battery pack is defective or the camera is not correctly set in the docking station. Reset the camera correctly in the docking station. h The charging time is approx. 200 minutes. h The AC adaptor (supplied) can be - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 55
... i You can photograph and view images while the camera is set in the docking station. Do not charge the battery pack immediately after the camera has been in continuous use for a long time i The battery pack becomes hot when the camera is used continuously for a long time. If you attempt to - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 56
PREPARING THE POWER When using a power outlet Power to the camera can be supplied from a power outlet if the docking station or the AC adaptor is used. Using the AC adaptor DC IN terminal DC IN terminal cover To power outlet 37 English Supplied AC adaptor Power cord - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 57
SETUP Using the docking station Use the supplied AC adaptor and power cord to connect the docking station to a power outlet, and set the camera in the docking station. Docking station To power outlet Supplied AC adaptor Power cord English 38 - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 58
or the sleep function has been activated. Recharging does not take place when the camera is in the shooting mode or playback mode. Warning concerning battery pack temperature i If the battery pack in the camera becomes too hot, a blinking temperature warning icon \ will appear on the monitor. If the - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 59
pictures: Set to REC. To play back images: Set to PLAY. 2 Open the monitor unit. 3 Press the ON/OFF button for at least 1 second. h The camera turns on. h If the date and time have not been set, the screen to set the date and time is shown on the monitor. REC - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 60
when the power save (sleep) mode is active In order to preserve battery pack power, the power save (sleep) function will automatically turn off the camera after 1 minute of no use during shooting, or 5 minutes of no use during playback (factory-preset setting). i When the power save mode is active - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 61
time settings have not been completed (page 43), the date and time cannot be recorded with the captured images. For this reason, immediately after the camera is turned on, the "Set date and time" reminder briefly appears, after which the K icon is shown on the Shooting Screen. To have the date - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 62
DATE AND TIME SETTING The camera will record the date and time an image or audio recording HINT on page 45. Example: To set the clock to 7:30 p.m. on December 24, 2008 1 Turn on the camera (page 40), and press the SET button. h The Clock Set Screen appears. h Follow the procedures below to enable - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 63
SETUP 3 Set the clock. 1 Select "TIME". 2 Press the SET button. h The Set Time Screen appears. 3 Set the time to "19:30". h The time is set in the following order: Set the hour → Set the minute. h A 24-hour clock is used for the time display. 4 Press the SET button. CLOCK SET TIME 19:30 OK 4 - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 64
button. HINT i Under normal conditions, while the battery pack is being replaced, an internal battery will maintain the date and time settings. However, (follow step 1). To correct the date and time settings 1 Turn on the camera. 2 Display the Option Setting Menu [1] (page 144). 3 Select "CLOCK SET - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 65
THE SHOOTING MODE AND PLAYBACK MODE Switch between the shooting mode (for recording) and the playback mode (for viewing your recorded images). 1 Turn on the camera (page 40). 2 Set the REC/PLAY switch to the desired mode. For recording: Set it to REC. For playback: Set it to PLAY. REC/PLAY - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 66
functions that are most often used and necessary to operate the camera, while the "NORMAL mode" enables full use of all the camera's many functions. Select the mode that is suitable for your purposes. 1 RECORDING MENU 1 2 MOVIE PHOTO 3 SCENE SELECT 8M 1 FILTER 2 FLASH 3 SELF-TIMER EXIT SET - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 67
SETUP Switching between the SIMPLE and NORMAL modes Use the SIMPLE/NORMAL switch, located next to the monitor, to switch between the SIMPLE and NORMAL modes. 1 Set the SIMPLE/NORMAL switch to the desired mode. SIMPLE mode: Set it to SIMPLE. NORMAL mode: Set it to NORMAL. SIMPLE/NORMAL switch - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 68
SIMPLE MODE/NORMAL MODE Accessing/exiting the SIMPLE/NORMAL Mode Menu Screen 1 Set the camera to the shooting or playback mode. h Use the REC/PLAY switch to select the shooting mode or playback mode. To access the Shooting Menu: Set - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 69
2 Set the camera to the SIMPLE mode or NORMAL mode. h Use the SIMPLE/NORMAL switch to select the desired mode. To select the SIMPLE mode: Set the switch - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 70
, step 4. Display the NORMAL Mode Setting Menu → go to page 53, step 4. h To cancel the Menu Screen, press the MENU button. MENU button 1 RECORDING MENU1 2 MOVIE PHOTO 3 SCENE SELECT 8M 1 FILTER 2 FLASH 3 SELF-TIMER EXIT OK Select - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 71
to change, and press the SET button. h The Setting Screen for the selected item appears. Select an item to change Description of selected item Select movie and photo size EXIT OK To keep in HDTV size HDTV size 3.5M [16:9] EXIT OK English 52 - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 72
a NORMAL Mode Setting Menu 4 Toggle the SET button up or down to select a tab. h The Menu Screen for the selected tab appears. Tab 1 RECORDING MENU1 2 MOVIE PHOTO 3 SCENE SELECT 8M 1 FILTER 2 FLASH 3 SELF-TIMER EXIT OK 5 Toggle the SET button to the right. 53 English 1 RECORDING MENU - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 73
Screen, press the MENU button. SETUP Select an item to change 1 RECORDING MENU 1 2 MOVIE PHOTO 3 SCENE SELECT 8M 1 FILTER 2 FLASH 3 SELF-TIMER EXIT OK Applicable mode PHOTO This setting is effective during video clip recording. : This setting is effective during still image shooting and - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 74
SIMPLE MODE/NORMAL MODE Overview of the SIMPLE Mode Setting Screen SIMPLE Mode Shooting Menu Select movie and 1 photo size 2 3 EXIT OK 4 55 English - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 75
video clip size will be 320 × 240 pixels, and the still image size will be 640 × 480 (4:3) pixels. 2 Focus range (page 72) h Select the focus range that corresponds to the distance to the subject. 7: The camera will operate. 9: The camera detects the subject brightness and - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 76
SIMPLE MODE/NORMAL MODE SIMPLE Mode Playback Menu 1 2 3 Start slideshow OK 4 57 English - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 77
1 Slideshow (page 86) h Specify the slideshow settings and play the slideshow. 2 Playback volume (page 87) h Adjust the volume for video clip and audio file playback. 3 Delete (page 88) h Delete files. 4 Remaining battery power indication (page 175) SETUP English 58 - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 78
SIMPLE MODE/NORMAL MODE Overview of the NORMAL Mode Setting Screen NORMAL Mode Shooting Menu 1 RECORDING MENU 1 2 MOVIE PHOTO 3 SCENE SELECT 8M 1 2 3 1 FILTER 4 2 FLASH 5 3 SELF-TIMER 6 EXIT OK 7 59 English - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 79
Video clip settings (page 93) : Portrait mode +: Landscape mode /: operate even in dark situations. n: The camera will detect the subject brightness and use the 7 Remaining battery power (page 175) English 60 SETUP - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 80
SIMPLE MODE/NORMAL MODE 1 RECORDING MENU2 2 MOVIE STABILIZER PHOTO STABILIZER 1 2 3 FOCUS 3 1 FOCUS MODE 4 2 EXP MEASURE 5 3 ISO 6 EXIT OK 7 61 English - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 81
Movie stabilizer (page 105) h Compensate for camera shake during video clip recording. \: Record with image stabilizer on. ]: Record without image stabilizer. 2 Photo stabilizer (page 105) h Compensate for camera focus can be set manually. +: The camera focuses on the subject (video clip - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 82
SIMPLE MODE/NORMAL MODE 1 RECORDING MENU3 2 WHITE BALANCE EXPOSURE 1 2 3 FACE CHASER 3 1 PHOTO WIDE-D 4 2 HIGH SENSITIVITY 5 3 DIGITAL ZOOM 6 EXIT SET OK 7 63 English - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 83
set automatically. T: Set the shutter speed manually. g: Set the aperture manually. H: Set the aperture and shutter speed manually. 3 Face chaser (page 116) -: Normal sensitivity 6 Digital zoom (page 120) Q: Enable the digital zoom. B: Disable the digital zoom. 7 Remaining battery power indication ( - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 84
for video clip and audio file playback. 3 Protect (page 124) h File protect setting (delete prohibited) 4 Delete (page 88) h Delete files. 5 Printing instructions (page 125) h Specify the printing instructions (DPOF settings). 6 Rotate (page 131) h Rotate a still image. 7 Remaining battery power - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 85
1 Resize (page 132) h Reduce the resolution of a still image. 2 Contrast correction (page 133) h Correct the contrast in the image. 3 Video clip edit (page 135) h Edit video clips. 4 Select folder (page 91) h Select a folder to play back. 5 Remaining battery power indication (page 175) English 66 - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 86
or the Movie View Shooting Screen. The field of view is easier to see when the Shooting Screen for the specific shooting mode is selected. * The PHOTO VIEW button is disabled when the camera ia connected to a TV. PHOTO VIEW button Movie view Press Press 67 English Photo view Video clip recording - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 87
the fingers of the right hand, from the little finger to the middle finger, around the camera, and hook the index finger above the lens. A finger is blocking the lens or flash. Example 2: Grip the camera by wrapping the fingers of the right hand, from the little finger to the index finger - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 88
the desired subject. i Subjects without vertical lines Use the focus-lock function to lock the focus while framing the subject vertically, then re-orient the camera to compose a horizontally framed image. 69 English - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 89
object at the same distance as the desired subject, then reposition the camera to compose the picture. i Fast-moving subjects Use the focus-lock an object at the same distance as the desired subject, then reposition the camera to compose the picture. HINT i Images captured in the still image shooting - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 90
49), select the recording size setting, and press the SET button. To keep in HDTV size HDTV size 3.5M [16:9] EXIT SET OK 4: The recorded video clip size will be 1920 × 1080 pixels, and the captured still image size will be 2496 × 1408 (16:9) pixels. b: The - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 91
Automatic focus (people, landscape, etc.) EXIT OK 7: The camera automatically focuses on the subject within a range of 80 cm (31.50 in.) to infinity (normal). 8: The camera focuses on a subject within a range of 1 cm (0.39 in.) to 1.0 m - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 92
image and sound files are recorded on the card installed in the camera. Taking pictures in backlight conditions... i When taking pictures with the light (instant review) i After shooting a picture, you can immediately view it by pressing the SET button once. i During instant review of a video clip, - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 93
SIMPLE/SHOOTING VIDEO CLIP RECORDING 1 Turn on the camera (page 40), and set it to the shooting mode (page 46). 2 Press the [ ] button. the recording. h Press the [ ] button again to stop recording. [ ] button Recording time Full-HD REC 00:00:09 5 Available recording time remaining English 74 - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 94
SHOOTING SINGLE SHOTS Capture a still image (single-shot). 1 Turn on the camera (page 40), [ and set it to the shooting mode (page 46). 2 Press the [ ] button. 1 Press the [ ] button halfway. h The autofocus operates, and the image is - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 95
are displayed i The shutter speed and aperture settings are shown on the Shooting Screen. You can use them as a reference when shooting. If the camera shake icon > appears... i During still image shooting, if the shutter speed is slow and the possibility that the image may be blurred due to - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 96
for example when the subject is in shadow or lit from behind. Your camera is equipped with four flash modes: red-eye reduction, auto flash, forced flash ;: The flash does not operate even in dark situations. - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 97
shooting i The flash unit becomes very hot and may cause a burn. Avoid touching the flash unit when shooting. HINT i The flash cannot be used during video clip recording. i By assigning an operation shortcut to the SET button (page 151), you can change the flash mode from the Shooting Screen (in the - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 98
clip. 1 Turn on the camera (page 40), and set it to the shooting mode (page 46). 2 Press the [ ] button. [ ] button [ ] button 3 When you see a scene you'd like to capture as a still image. press the [ ] button. 4 Press the [ ] button to end the video clip recording. Full-HD REC 00:00:09 79 - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 99
which this occurs will differ depending on the subject and on the video clip mode setting (page 93). If you intend to capture a still image while recording a video clip, it is suggested that you take note of the remaining video recording time. About the recording size of still images i The size of - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 100
has two zoom functions: optical zoom and digital zoom. 1 Point the camera lens at the subject. Zoom switch 2 Push the zoom optical and digital zoom are enabled Magnification Optical zoom When optical zoom only is enabled Digital zoom (yellow) Pointer 3 Take the picture. For video clip - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 101
it possible to capture images and play them back using the supplied remote control unit. 1 Prepare the remote control unit (page 30). 2 Turn the camera on, and set the REC/PLAY switch to REC or PLAY. h Set the REC/PLAY switch to REC for shooting, or to PLAY for playback. 3 - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 102
AND STILL IMAGES 1 Set the camera to the playback mode (page 46). 2 Toggle the SET button to the left or right to display the image you wish to play back. h Video clips are indicated by a video clip pattern along the left and right sides of the screen. SAVE 2008.12.24 PLAY - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 103
SIMPLE/PLAYBACK To do this... Do this Normal forward playback Press the SET button. Stop playback During playback, toggle the SET button down. Pause During playback, press the SET button or toggle the SET button up. During accelerated playback, toggle the SET button up. To play back During - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 104
on the monitor or a television.) i Depending on the card, shooting may end even before the possible shooting time indicated. Display the video clip playback point i During video clip playback, press the MENU button for at least 1 second to display a bar showing the current playback point in the - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 105
Menu (page 49), select the slideshow setting, and press the SET button. =: Play back all files. 3: Play back video clips and audio files. c: Play back still image files. SLIDESHOW ALL MOVIE PHOTO START 2 Select the type of file to play back, and press the SET button. h Slideshow playback begins - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 106
PLAYBACK VOLUME Adjust the playback volume for video clips and audio files. 1 Display the SIMPLE Mode SIMPLE Mode Playback Menu. 14 VOLUME SETTING HINT The volume can be adjusted during playback i During video clip or audio file playback, if you move the zoom switch, the volume control bar will - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 107
SIMPLE/PLAYBACK DELETING FILES You can delete files if you no longer need them. You can delete the files one at a time, or all at once. 1 Display the SIMPLE Mode Playback Menu (page 49), select "Delete file", and press the SET button. DELETE SINGLE: Deletes one file at a time. DELETE ALL: Deletes - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 108
DELETING FILES 3 Select "DELETE", and press the SET button. h The currently displayed file is deleted. h To delete other files, select the files, select "DELETE" and press the SET button. h The Delete Confirmation Screen again appears. To delete the files, select "YES", - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 109
button, you can push the zoom switch toward the [T/]] side to show the image full screen. h If the zoom switch is pushed toward the [W/P] side while the 9- the screen to select the playback folder (page 91). SET button Video clip Orange frame Still image 100 0001 0002 0003 0004 0005 0006 - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 110
the zoom switch toward the [W/P] side 2 times. h The screen to select the playback folder appears. h If the zoom switch is pushed toward the [T/]] side, the camera changes to the 9-image display (page 90). 100 101 102 103 104 105 FOLDER : 100SANYO 3 Toggle the SET button to the left or right to - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 111
SIMPLE/PLAYBACK Magnifying (zooming in) the image 1 Display the image that you want to magnify. h For a video clip, pause playback at the place you want to magnify. 2 Push the zoom switch toward the [T/]] side. h Magnification is enabled. h The image is magnified, and - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 112
will be, but the file size will also be larger. Select the recording size that is correct for the intended purpose. Movies You can record video clips in either the HD mode (16:9 horizontal to vertical aspect ratio) or the SD mode (4:3 aspect ratio). In addition, the higher the frame rate number - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 113
Video clips that were photographed in different modes cannot be joined. Restrictions when X is set i When the camera is connected to a TV, the image is shown on the camera a still image during video clip recording Zoom Image stabilizer Scene select (fixed at =) Manual exposure Face chaser recording - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 114
RECORDING SIZE Sequential shots 1 Display the NORMAL Mode Shooting Menu (page 49), select "PHOTO", and press the SET button. 2 Select c, and press the SET button. 3 Press the [ ] button. h Shooting begins. Shooting continues as long as the [ kept pressed. ] button is HINT i The maximum number - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 115
Audio recording Your camera can make audio recordings and play them back. Audio recording 1 Display the NORMAL Mode Shooting Menu (page 49), select "MOVIE", and press the SET button. 2 Select - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 116
resolution setting is l exceeds about 5 hours 30 minutes, the recorded file is saved once, and the recording continues in a new file. When recording a video clip whose resolution setting is other than l, and the file size exceeds 4 GB, the recorded file is saved once, and the recording continues in - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 117
NORMAL/SHOOTING 2 Play back the recording. To do this... Do this Start playback Press the SET button. Normal playback Pause Press the SET button. Toggle the SET button up. Stop playback Toggle the SET button down. Fast forward During playback, toggle the SET button to the right. Each - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 118
specific shooting conditions. 1 Display the NORMAL Mode Shooting Menu (page 49), select "SCENE SELECT", and press the SET button. Scene setting Features = Auto The camera Not available Shooting mode setting Singleshot Sequential shots Video clip m m m m m m m m m m m m m - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 119
button. HINT i When capturing images using the lamp Q, fireworks + or night view portrait / setting, use a tripod or other method to stabilize the camera. i If the recording size is set to X, the scene select function will be fixed at =. i A table showing the limitations for settings corresponding - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 120
FILTERS The filter feature changes image characteristics such as color tones, to apply unique effects to the photographed image. 1 Display the NORMAL Mode Shooting Menu (page 49), select "FILTER", and press the SET button. &: No filter is used (none). %: Skin tones are enhanced in close-up shots ( - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 121
flash unit. h The flash unit opens. 2 Display the NORMAL Mode Shooting Menu (page 49), select "FLASH", and press the SET button. k: The camera detects the subject brightness and uses the flash only when necessary. m: The flash operates with every image captured, regardless of the subject brightness - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 122
SELF-TIMER 1 Display the NORMAL Mode Shooting Menu (page 49), select "SELF- TIMER", and press the SET button. N: Turns off the self-timer function. y: The image is captured about 2 seconds after the [ ] button or [ ] button is pressed. x: The image is captured about 10 seconds after the [ ] button - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 123
self-timer menu, and press the SET button. i The self-timer is automatically reset to off N after the power save mode is activated and the camera turned off. When x is selected... i When the [ ] button or [ ] button is pressed, the multi-indicator will blink for about 10 seconds, and then the image - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 124
is enabled. ]: Motion compensation is not enabled. 2 Select the desired setting, and press the SET button. h This completes the movie stabilizer setting. Compensate for camera shake when shooting still images 1 Display the NORMAL Mode Shooting Menu (page 49), select "PHOTO STABILIZER", and press the - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 125
may not be possible for the camera to compensate for violent motion. i If the digital zoom (page 81) is video clip recording. h Setting the camera to the sequential shots mode (page 95). When motion compensation is enabled, i The following icons are shown on the monitor: Full-HD 00:04:30 The movie - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 126
(total range mode) *: 80 cm (31.50 in.) to infinity (normal mode) -: The focus can be manually set to any distance from 1 cm (0.39 in.) to 40 m (131.23 ft.), as well as to infinity (manual focus). +: 1 cm (0.39 in.) to 1 m (3.28 ft.) (super macro mode: wide end only) h When the focus - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 127
NORMAL/SHOOTING How to use the manual focus 1 Display the NORMAL Mode Shooting Menu (page 49), slight variance between the distance (numerical figure) you set in the manual focus mode and the actual distance. About zoom movement when using the manual focus i If the focus distance is set to 70 cm ( - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 128
from 9 different focus points within the shooting area visible on the monitor. When the image is focused, a target mark & appears. Spot focus: The camera focuses on the subject in the center of the monitor. 1 Display the NORMAL Mode Shooting Menu (page 49), select "FOCUS MODE", and press the SET - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 129
of light-measuring modes. Multi-section light-measuring: The light is modulated after sampling from multiple areas of the entire shooting screen. Center-weighted light-measuring: spot mark appears in the center of the monitor. Full-HD 40 00:02:47 F3.5 1/40 Light-measuring spot mark English 110 - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 130
a fixed setting. 1 Display the NORMAL Mode Shooting Menu (page 49), select "ISO", and press the SET button. =: The ISO sensitivity is set automatically (video clip recording: ISO 50 to 1000; still image shooting: ISO 50 to 200). *: Sets sensitivity to ISO 50. u: Sets sensitivity to ISO 100. v: Sets - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 131
(page 151), you can change the ISO setting from the Shooting Screen. CAUTION Does the image appear to flicker when recording a video clip? i If recording a video clip under fluorescent lights with the ISO sensitivity set to w or higher, a noticeable flicker may appear in the image. English 112 - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 132
conditions or change the overall tone of the image, the white balance can be manually set. 1 Display the NORMAL Mode Shooting Menu (page 49), select "WHITE BALANCE", and press the SET button. >: The camera will make the white balance adjustment automatically based on the natural and artificial light - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 133
photography). g: This allows you to set a specific aperture size. The camera automatically sets an appropriate shutter speed based on deep field depth). ,: This allows you to set a specific shutter speed and aperture size (manual exposure control). Example: When shooting in a dark location without - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 134
setting. HINT i To prevent the effects of camera shake at slow shutter speeds, it is recommended to use a tripod or other Even if the shutter speed is set to slower than 1/29 sec., the shutter speed during video clip recording is 1/30 sec. i If the exposure setting is set to T, g or - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 135
magnify it, the magnified image will be centered on the face(s) that were focused on. CAUTION i The face chaser function does not work while the digital zoom is being used. i The face chaser function does not work when zooming in or out. i The face chaser function may not work when the - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 136
(page 102): Disabled (no flash) Exposure (page 114): @ Noise reduction (page 153): "PHOTO NR" is "OFF" Flicker reduction (page 156): "OFF" i During video clip recording, the photo wide D-range is automatically switched to "OFF". i The field of view of captured images will appear slightly narrow. 117 - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 137
NORMAL/SHOOTING CAUTION i The photo wide D-range effect may be insignificant if you are shooting in an extremely bright or extremely dark environment. i Note that the exposure time during photo wide D-range shooting is comparatively longer than for normal shooting. i When there are smear or flare - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 138
156) is set to "ON", the high sensitivity mode automatically changes to "OFF". i When the shutter speed is reduced to create a bright image, video clip motion will appear uneven during playback. i When shooting in a dark environment, the autofocus and auto exposure may not function effectively. 119 - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 139
This setting allows you to specify whether or not the digital zoom is enabled during zoom shooting. 1 Display the NORMAL Mode Shooting Menu (page 49), select "DIGITAL ZOOM", and press the SET button. Q: Digital zoom can be used. B: Digital zoom cannot be used. 2 Select the desired setting, and press - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 140
Exposure compensation bar HINT The exposure compensation setting is canceled in the following cases: i When the pointer is set to the center position. i When the camera is set to the playback mode. i After the power is turned off. i When the - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 141
Menu (page 49), select "SLIDESHOW", and press the SET button. MODE: Specify the file type to play back. ALL: Play back all files. MOVIE: Play back video clips and audio files. PHOTO: Play back still image files. TIME: Adjust the transition speed (the period that an image is displayed before it - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 142
PLAYBACK 2 Select "START" and press the SET button. h Slideshow playback begins. h To stop slideshow playback, press the SET button or MENU button. HINT BGM for video clips? i When video clips are played back in a slideshow, the recorded audio track is played back; the BGM is not played. 123 English - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 143
NORMAL/PLAYBACK FILE PROTECT Prevent accidental erasure of image and audio files. 1 Display the file that you want to protect from accidental erasure, and display the NORMAL Mode Playback Menu (page 49). 2 Select "PROTECT" and press the SET button. h "LOCK" appears. h If the protect mode has - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 144
made at shops offering digital print services. Moreover, this camera is DPOF-compatible, so you can use the camera to specify the number of prints, whether or not the date is displayed on the print, and also to request an index print. Display the Printing Instructions Screen 1 Display the NORMAL - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 145
a printer or have the digital print service shop print out a still image from a video clip, you must first save it (extract still) as a still image (page 85). About the DPOF format i DPOF (Digital Print Order Format) is a print order format. You can connect your camera to a DPOF-compatible printer - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 146
Screen appears. h If "EACH IMAGE" was selected, toggle the SET button to the left or right to display the desired image to print. h The printing instructions that are currently active for the displayed image are shown. You can toggle the SET button to the left or right to confirm the printing - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 147
requested print quantities and dated prints are stored. h The display returns to the Printing Instructions Screen. HINT Can't specify dated prints? i Dated prints are not possible for photos that were captured before the camera's date and time setting was completed. NORMAL/PLAYBACK English 128 - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 148
on one sheet is called an "index print". This is convenient for use as a list of the images you have captured. 1 Display the Printing Instructions Screen (page 125). 2 Select "INDEX". 3 Press the SET button. h The Index Print Screen appears. SET: Specify an index print copy. EXIT: Discontinue the - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 149
"ALL CLEAR". 3 Press the SET button. h The Confirm All Clear Screen appears. CANCEL: Clear the printing instructions for all images. EXIT: Cancel the clear procedure and return to the Printing Instructions Screen. ALL CLEAR :2008/12/24 :2 copies CANCEL EXIT OK 4 Select "CANCEL", and press the SET - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 150
ROTATE STILL IMAGE Captured still images can be rotated to the correct orientation for viewing. 1 Display the still image you wish to rotate, and display the NORMAL Mode Playback Menu (page 49). 2 Select "ROTATE", and press the SET button. RIGHT: Rotates image clockwise 90 degrees. LEFT: Rotates - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 151
NORMAL/PLAYBACK REDUCE STILL IMAGE SIZE (RESIZE) A captured image can be resized to a smaller size and saved as a separate image. 1 Display the still image whose size you want to change, and display the NORMAL Mode Playback Menu (page 49). 2 Select "RESIZE", and press the SET button. - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 152
CORRECTING THE CONTRAST Correct the contrast in a photo. 1 Display the image to be modified, and display the NORMAL Mode Playback Menu (page 49). 2 Select "CONTRAST CORRECT", and press the SET button. h The Edit Photo Screen appears. CORRECTION: Proceed with the image correction. EXIT: Return to - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 153
was not able to successfully repair the image. i The correction function works to automatically edit flaws that the camera detects in captured images. In some cases, the camera may fail to correct a flaw. Concerning the date and time information for the saved image i When an image is corrected - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 154
one separate clip ("joining"). Procedure to cut (extract) a portion of a video clip Specify the frames 1 2 (1, 2) where the video clip is to be cut. A B C J Extract the specified portion. [Two ways to cut the video clip] i Trim away portions A and C, and save portion B. i Delete portion - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 155
, not only will the editing not be properly completed, but the original video clip may also be erased. i As the number or size of the video clips increases, the card memory may become full, making it impossible to edit or save the video clips. In this case, you will need to free some of - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 156
clip cutting (extracting) 1 Display the video clip from which you wish to extract a segment. 2 Display the NORMAL Mode Playback Menu (page 49), select "EDIT VIDEO", and press the SET button. EDIT VIDEO CUT JOIN OK 3 Select "CUT" and press the SET button. h The Cutting Screen appears. Start - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 157
will be the first frame of the extract. h If the start point of the video clip is also the start point of the extract, proceed to step 5. frame. 5 Toggle the SET button up. h The start point of the video clip Approximate playback time extract is set, and the screen to specify the end - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 158
the large amount of data can become quite long. To avoid problems caused by the battery pack becoming depleted in the middle of video clip editing, before starting to edit be sure that a sufficiently charged battery pack is installed in the camera, or connect the AC adaptor. i It is recommended that - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 159
be joined. 1 Display the NORMAL Mode Playback Menu (page 49), select "EDIT VIDEO", and press the SET button. EDIT VIDEO CUT JOIN OK 2 Select "JOIN" and press the SET button. h The 6-image playback display for video clips appears. Select a clip / SAVE 100 0010 0011 0012 0013 NORMAL/PLAYBACK - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 160
clip will be saved as a new file. The original video clips remain unchanged. OVERWRITE: The original video clips will be deleted. Only the joined video clip will be saved. REVIEW CLIP: Play back the joined video clip before saving it. Select a clip / SAVE 100 1 0001 0002 0004 0005 00:00 - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 161
the large amount of data can become quite long. To avoid problems caused by the battery pack becoming depleted in the middle of video clip editing, before starting to edit be sure that a sufficiently charged battery pack is installed in the camera, or connect the AC adaptor. i It is recommended that - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 162
camera monitor. 2 Press the MENU button for INFO HD-SHQ 1 1280×720 30fps SHQ AVC/H.264 100-0001 2 3 11.9MB 4 00:00:03 5 at least 1 second. h The Information Screen 0.3 6 appears. h If the MENU button is ; 2008.12.25 19:30 9 pressed again, the - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 163
OPTION SETTINGS OPTION SETTINGS DISPLAY THE OPTION SETTING MENU The camera settings are executed via the Option Setting Menu. 1 Turn on the camera, set it to the NORMAL mode, and press the MENU button. 1 RECORDING MENU1 2 MOVIE PHOTO 3 SCENE SELECT 8M 1 FILTER 2 FLASH 3 SELF-TIMER EXIT OK - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 164
2 Select "INFO DISPLAY", and press the SET button. SHOW ALL: Display the capture date and playback time (for video clips). DATE & TIME: Display the capture date. COUNTER: Display the video clip playback time. OFF: Do not display the capture date and playback time. INFO DISPLAY SHOW ALL DATE & TIME - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 165
1 (page 144). 2 Select "STARTUP DISPLAY", and press the SET button. DATE & TIME: The camera's date and time setting is shown. Xacti: The Xacti logo is shown. OFF: No startup display. STARTUP DISPLAY DATE & TIME Xacti OFF OK 3 Select the desired setting, and press the SET button. h The selected - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 166
taken using the selftimer. KEY SW: Select the sound that is produced when the SET button, MENU button, etc. are pressed. AUDIO GUIDE: Mute or enable the camera's audio help guide. OPERATION VOL: Adjust the volume of the operation sounds. OPERATION BEEP TURN ON/OFF ON SHUTTER D KEY SW A AUDIO - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 167
or down to select the desired setting, and press the SET button. h The screen to select operation sounds appears. h The respective screen to enable or disable the sound appears. h Toggle the SET button up or down to select the desired setting, and - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 168
POST-VIEW DISPLAY SETTING Specify the duration that the captured image appears on the monitor (postview) after the [ ] button is pressed. 1 Display the Option Setting Menu 1 (page 144). 2 Select "POST VIEW", and press the SET button. 1 sec: The post-view image is displayed for 1 second. 2 sec: The - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 169
SPECIFY A FOLDER TO SAVE FILES Create or select a recording folder (a folder in which to store recorded files). 1 Display the Option Setting Menu 1 (page 144). 2 Select "REC FOLDER", and press the SET button. h Select "NEW". h Select the desired - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 170
ASSIGN SET BUTTON FUNCTIONS Assign functions (operation shortcuts) to the SET button when it is toggled up, down, left or right when the Shooting Screen is displayed. 1 Display the Option Setting Menu 2 (page 144). 2 Select "SHORTCUTS", and press the SET button. : Assign the function when the SET - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 171
4 Toggle the SET button up or down. h Display the function you wish to assign to the key. SHORTCUTS AF LOCK OK 5 Press the SET button. h The selected function is assigned to the key, and you are returned to the Shortcuts Screen. h To assign functions to the other keys, repeat steps 3 through 5. 6 - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 172
NR: Turn ON/OFF the image noise reduction function during still image shooting. WIND SOUND NR: Turn ON/OFF the wind noise reduction function during video clip/ audio recording. NOISE REDUCTION PHOTO NR OFF WIND SOUND NR ON OK 3 Select the desired function and press the SET button. h The screen - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 173
OPTION SETTINGS 4 Toggle the SET button up or down to select the desired setting, and press the SET button. h This completes the noise reduction setting. HINT i The still image NR function is effective when the shutter speed is 1/4 second or less. i Compared to normal shooting, when the still image - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 174
ADJUST THE IMAGE QUALITY The camera can adjust the image quality as the image is captured. 1 Display the Option Setting Menu 2 (page 144). 2 Select "IMAGE SETTINGS", and press the SET button. - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 175
FLICKER-REDUCTION The flicker-reduction setting reduces the flicker that results when filming video clips under fluorescent lights and the like where the background lighting pulsates at the frequency of the power supply. 1 Display the Option Setting Menu 2 (page - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 176
MONITOR BRIGHTNESS Adjust the brightness of the camera's monitor display. Use this adjustment when the monitor image is difficult to view because of ambient lighting. 1 Display the Option Setting Menu 2 (page 144). 2 Select " - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 177
ADJUST THE VOLUME OF AN EXTERNAL MICROPHONE The input level of a microphone connected to the camera can be adjusted. 1 Display the Option Setting Menu 2 (page 144). 2 Select "EXT MIC VOLUME", and press the SET button. EXT MIC VOLUME 3 Toggle the SET - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 178
SCREEN LANGUAGE You can set the monitor of your camera to display the messages in any one of several languages. 1 Display the Option Setting Menu 3 (page 144). 2 Select "LANGUAGE", and press the SET button. : Japanese - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 179
TV OUTPUT SETTING Specify the type of image signal that is output from your camera's USB/AV terminal, COMPONENT/AV terminal or HDMI terminal. 1 Display the Option Setting Menu 3 (page 144). 2 Select "TV OUTPUT", and press the SET button. TV - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 180
the SET button. h The screen to change the parameter for the selected setting appears. NTSC: Outputs NTSC video signals. PAL: Outputs PAL video signals. 4:3: Use this setting when a TV having an aspect ratio of 4:3 is connected. 16:9: Use this - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 181
works to couple the TV power source and the camera power source, for example, but the camera's power save function is disabled. i For information concerning connecting and operation, please see your TV's instruction manual. (As of May 2008, SANYO TVs that incorcorporate the HDMI-CEC function have - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 182
Relation between "TV TYPE" setting and TV display The tables below show the video signal that is output when the "TV TYPE" setting is changed. However, note connected Image file to be displayed TV display Still image (4:3) 4:3 4:3 Video clip in SD mode Video clip in HD mode 163 English - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 183
displayed Still image (4:3) TV display 16:9 16:9 Video clip in SD mode Video clip in HD mode * The still image examples are for images camera's "TV TYPE" setting, or change the screen size setting on your TV. To change the screen size setting on your TV, please refer to the instruction manual - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 184
turns off after a specified period of inactivity. The power save function works to conserve the battery pack power when the camera is not being used, or to prevent the battery pack from dying if the camera has accidentally been left on. You can specify the elapsed time (standby time) before the - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 185
OPTION SETTINGS 3 Select the desired option, and press the SET button. h The Set Standby Time Screen appears. 4 Toggle the SET button up or down to set the standby time. Up: Increases the standby time. Down: Decreases the standby - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 186
or the card is replaced with another card, the consecutive numbering of file names continues from the last number recorded by the camera. File name (image number) Card A 0001, 0002 ...... 0012, 0013 Replace card Card B 0001, 0002 ...... 0012, 0013 - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 187
OPTION SETTINGS i If Card B already has files in it when it replaces Card A, file names are assigned as follows. When the highest file number on Card B (before replacing) is lower than the highest file number on Card A: the file name of the next recorded image continues from last file name recorded - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 188
FILE NO. MEMORY 1 Display the Option Setting Menu 3 (page 144). 2 Select "FILE NO. CONT'D", and press the SET button. ON: The file number memory function is on. OFF: The file number memory function is off. FILE NO. CONT'D ON OFF SET OK 3 Select the desired setting, and press the SET button. h - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 189
, or i If it was formatted using a personal computer or another digital camera. The card cannot be formatted if the lock switch is set to full format may resolve the problem. FORMAT: A normal formatting is executed. FULL FORMAT: The entire card is scanned and formatted. (When there is little battery - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 190
is recommended that you physically destroy it. If you are transferring the card to someone else to use, it is recommended that you use the camera's full format function to reformat the card, or use commercially available software for erasing card data. Managing data is the responsibility of the user - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 191
factory-preset settings. EXIT: Do not change the settings, and return to the Option Setting Menu. 3 Select "RESET", and press the SET button. h The camera settings are reset to the factory-preset settings. RESET SETTINGS RESET EXIT OK HINT i Note that the following settings do not change with this - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 192
a table showing the maximum number of images and recording time for specific cards, please see "Possible No. of Images/Possible Shooting Time/Possible the remaining number of images and video recording time 1 Set the REC/PLAY switch to REC, and turn on the camera. h The remaining number of images - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 193
i When the remaining number of images or the remaining video recording time is "0", you cannot capture any more images (page 88) from the card. i When the remaining number of images or the remaining video recording time is "0", it may be possible to capture a few more images by setting a lower resolution - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 194
of the remaining charge. 1 RECORDING MENU1 2 MOVIE PHOTO 3 SCENE SELECT 8M 1 FILTER 2 FLASH 3 SELF-TIMER EXIT OK Battery pack remaining charge indicator Battery pack remaining charge indicator Battery remaining charge No indication, or Approx. full. Power is low. It will soon be - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 195
SETTINGS HINT i If any file is present, you can also check the remaining battery pack charge on the Information Screen (page 143). i Battery life may differ even among battery packs of the same type. i Depending on the usage of the camera (such as the number of times the flash is used, the use of - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 196
interface cable TV NTSC: m PAL: n n m Dedicated Camera monitor n m n component cable TV m n m Camera monitor n m n HDMI cable TV m n m m: Images are output n: Images are not output Dedicated S-AV interface cable Yellow plug: To Video Input terminal To AC adaptor COMPONENT - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 197
cable Yellow plug: Not connected* To AC adaptor COMPONENT/AV terminal i Insert the plug with the [n] mark facing up. Set the input to "VIDEO". S-terminal White plug: To Audio Input (L) terminal Red plug: To Audio Input (R) terminal * When connected, the images are not produced normally on the - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 198
Connect to the 480p/720p/1080i terminal If your TV has a 480p/720p/1080i input terminal, you can enjoy the high video quality of component output from your camera. Dedicated component cable To AC adaptor White plug: To Audio Input (L) terminal Red plug: To Audio Input (R) terminal COMPONENT/AV - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 199
Connecting to the HDMI terminal HDMI cable (recommended accessory) To AC adaptor HDMI terminal To reduce spurious radiation i Please affix the cores (included) Set the input to "HDMI". To HDMI terminal Core (large) Core (small) HINT i HDMI, the HDMI logo and High- - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 200
as well. i Use the TV controls to adjust the playback volume. The camera's controls will not work to adjust the volume. i If the camera set in the docking station is in the sleep mode, press the operation mode button on the docking station, or the ON/OFF button on the remote control unit, to turn - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 201
can view full high-definition images right on your TV screen. In addition, you have access to file operations such as copy and delete, as well as file management using the calendar. For detailed information about using Xacti Library, please see the separate Xacti Library Instruction Manual. English - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 202
PictBridge MODE Your camera supports the PictBridge function. By connecting the camera directly to a PictBridge-enabled printer, the camera's monitor can be the camera, open the monitor unit to turn on the camera, and turn on the printer. 2 Use the supplied docking station to connect the camera to - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 203
the USB interface cable, turn off the camera, and then reconnect the cable. i During PictBridge printing, the camera's button operation response is slower. i If the camera is powered by the battery pack for printing, make sure that the remaining battery charge is sufficient. CONNECTING TO A PRINTER - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 204
PRINTING Printing selected images Procedure to select one still image and print it. 1 Complete the printing setup (page 183). 2 Select the one image icon Y, and press the SET button. h The screen to select images for printing appears. 3 Toggle the SET button to the left or right to display the - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 205
4 Specify the number of prints. 1 Toggle the SET button up to select "COPIES", and press the SET button. 2 Toggle the SET button up or down to specify the number of prints. 3 Press the SET button. h "PRINT" is selected. 5 Press the SET button. h Printing begins. PRINT 1 IMAGE 100-0022 :1 copy PRINT - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 206
PRINTING Printing all images Print all of the images on the card. 1 Complete the print preparations (page 183). 2 Select the all images icon u, and press the SET button. h The Print All Images Screen appears. 3 Select "PRINT", and press the SET button. h Printing begins. PRINT ALL IMAGES 100-0022 - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 207
Making an index print Make an index print of all the images on the card. 1 Complete the print preparations (page 183). 2 Select the index print icon [, and press the SET button. h The Index Print Screen appears. INDEX 3 Select "PRINT", and press the SET button. h Printing begins. PRINT EXIT OK - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 208
PRINTING Printing images according to printing instructions (requested images) Procedure to print all the each image and confirm its printing instructions. CAUTION i Requested images printing w is not possible if a printer is used that does not support your camera's DPOF function. 189 English - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 209
Changing the printer settings Images are printed according to settings specified by the camera, such as paper type, size, layout, printing quality, etc. 1 Complete the print preparations (page 183). 2 Select the printer settings icon v, and press the SET button. h - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 210
printer that is connected. i To use printer functions which do not appear on your camera's Printer Settings Screen, select "PRINTER VALUES". i If a function set by the camera is not available in the printer, the camera's printer settings will automatically change to "PRINTER VALUES". 191 English - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 211
Stereo microphone HINT i The input level of the connected microphone can be adjusted (page 158). i When an external microphone is connected, the camera's stereo microphone is disabled. i When headphones are connected, the internal speaker output is turned OFF. i It is recommended that you do not - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 212
a hot shoe. i The shoe mount may not accommodate some devices, such as some large-size flash units or video lights. CAUTION i Take care not to apply undue force when attaching a device to the camera's shoe mount, as doing so may damage the shoe mount or the adaptor on the device. 193 English - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 213
pack temporarily lost its power. The ambient temperature is very low. The battery pack life has expired. The remaining battery pack power is low. A recorded file is being saved on the card. The camera has determined that the image is bright enough and the flash is not necessary. Action Place - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 214
the self-timer and the exposure compensation are retained even after the camera is turned off. Select the resolution setting according to the intended use of a photo (trimming). *, +, G: For printing standard photo (photo service) sizes. ,, [: For photos displayed on a web page, or sent as e- - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 215
I get the distant view into focus? The video clip I shot outdoors is completely white. Answer - - - Action Because shooting with the optical zoom uses the optics of a physical lens, you can shoot without losing minute details in the image. The digital zoom, on the other hand, works by magnifying - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 216
be recorded with the images. When capturing an image, devise a way to compensate for a bright subject, for example, by changing the shooting angle. Hold the camera correctly and slowly press the [ ] button halfway to lock the focus. Then press the [ ] button all the way to capture the image. When - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 217
edited using my computer? Why is there a motor-like sound during video clip playback? Answer This may happen when trying to play back images stored on a card from a different digital camera. If the subject moves or the camera is moved during recording, a distorted image may sometimes occur. Due to - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 218
. Component/HDMI signal: Outputs the Y signal, B-Y signal and R-Y signal separately. The picture quality becomes increasingly higher, in order from normal video output, to S-video output, to component output, to HDMI output. You cannot output the image when both cables are connected at the same time - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 219
from a nearby TV or radio during battery recharging? Why does the "Card full" message appear? Why does the "Card is protected" message appear? Why can't the camera be operated? Answer There is a problem with the printer. You have attempted to join video clips having different resolutions or frame - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 220
other than this camera. - A problem has occurred within the camera or card. Action After saving your files to a different medium, format the card. When the camera is connected to a TV, you can switch the camera's video output to NTSC or PAL. If you have questions about accessories etc., please - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 221
TROUBLESHOOTING Before taking your camera to the repair shop, check the following table for a possible solution to the problem. Camera Power Problem No power. A blinking temperature warning icon is \ shown, and the camera does not turn on. The camera turns off by itself. Cause Action The - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 222
TROUBLESHOOTING Shooting Problem An image is not captured when the [ ] button or [ ] button is pressed. Cause The power is not turned on. The maximum number of images that can be captured or the maximum video clip recording time has been reached. Action If the power save function was activated, - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 223
Shooting Problem The flash does not operate. The digital zoom does not work. Cause The flash off mode is selected. The flash unit is not open. The battery pack is dead. The still image is set to J. The digital zoom setting is set to "OFF". Action Set the flash to automatic flash mode or forced - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 224
TROUBLESHOOTING Shooting Monitor Problem Cause A warning tone (beep-beepbeep) sounds, and it is is not possible. The battery pack is consumed. The optical zoom has moved to the maximum magnification position. The ISO sensitivity setting is too high. The camera's internal temperature is high. - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 225
Problem The image is too dark. The video clip picture is flickering. Cause The flash was blocked by a finger or other object. The subject was too far away. The subject was lit from behind. There is not enough light. The video clip was filmed under fluorescent lighting. Action Hold the camera - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 226
TROUBLESHOOTING Problem The image is too bright. The image is not in focus. Viewing images Cause The forced flash mode is selected. The subject was too bright. The ISO sensitivity setting is incorrect. The subject is too close to the camera. The focus setting is not correct. The camera moved when - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 227
Viewing images Problem The colors of the images captured indoors are not correct. A part of the Capture the image using the forced flash mode. Set the white balance setting correctly. Hold the camera correctly, and make sure the lens is not obstructed. Play back after capturing images or making - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 228
TROUBLESHOOTING Problem S-AV interface cable and the dedicated component cable are connected. The camera is not correctly connected to the TV. The TV input is the correct connection. Follow the instructions to make the connection correctly. Set the input on the TV to "VIDEO" or "HDMI". Not a - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 229
Charging Misc. Problem Cause The camera is set in the docking station but the installed battery is not being recharged. The AC adaptor is not connected to the docking station. The camera is not correctly connected to the docking station. The camera is turned on. The "No card" message appears. - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 230
TROUBLESHOOTING Misc. Problem The audio guide does not sound. The recording capacity is less than that indicated in the section "Possible No. of Images/ Possible Shooting Time/ Possible Recording Time" (page 222). The battery pack appears to be swollen. Cause The audio guide setting is set to " - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 231
Docking station Remote control unit Problem The remote control unit does not seem to work. Cause The remote control unit is aimed at the TV (not at the camera's remote control sensor). Something is obstructing the space between the remote control unit and the camera's remote control sensor. The - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 232
's remote control sensor. The remote control codes for the remote control unit and camera's remote control sensor are different. Action Operate the remote control unit from a position up to 7 meters from the docking station. Change the remote control code. Reference page 30, 31 32 213 English - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 233
Q Focus range: Fixed at *. Flash: Fixed at l. Focus range: + cannot be selected. Flash: Fixed at l. Still image NR: Fixed at "OFF". * When recording a video clip in dark surroundings, the shutter speed decreases to 1/15 sec in order to produce a sufficiently bright image. However, when the flicker - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 234
TROUBLESHOOTING Filter Setting Cosmetic % Monochrome W Sepia , Remarks Focus range: + cannot be selected. Still image mode: J cannot be selected. Focus range: + cannot be selected. About the scene - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 235
GB SDHC Memory Card) Image sensor/ camera effective number of pixels CMOS sensor Still images: Approx. 4 million pixels Movies (HD mode): Approx. 3.56 million pixels Movies (SD mode): Approx. 2.18 million pixels * Video clip files recorded with models VPC-CA65 and VPC-CG65 are in the same H.264 - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 236
SPECIFICATIONS Still image shooting mode (recording resolution) Video ) HD mode Full-auto TTL, manual setting possible Optical 10× zoom lens Still image shooting: f = 6.3 mm to 63.0 mm (35 mm film camera conversion 38 mm to 380 mm) Video clip recording: f = 6.3 mm to 63.0 mm (35 mm film camera - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 237
Digital zoom Shutter speed Sensitivity Programmable AE/Shutter speed priority AE/ Aperture priority AE/Manual function is set to lamp mode Q) Still image shooting (standard output sensitivity*)/ video clip recording mode: Auto (video clip recording: ISO 50 to 1000; still image shooting: ISO 50 to - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 238
SPECIFICATIONS Minimum subject illumination 9 lux (1/30 sec in the scene select AUTO mode) 3 lux (1/15 sec in the HIGH SENSITIVITY or lamp mode) Image stabilizer Movie video clip recording mode: Continuous focus), manual supply Battery pack Li-ion battery pack Li-ion battery during recording) - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 239
unbalanced [HDMI] terminal* Video output Total number of scan lines (effective number of scan lines): 750p (720p)/1125i (1080i)/525p (480p) Audio output: L-PCM 48 kHz sampling [USB] terminal* USB AC adaptor DC power input) [VAR-G8]) terminal * Via the docking station APPENDICES English 220 - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 240
SPECIFICATIONS Battery life Shooting Playback Still image shooting mode Video clip recording mode Approx. 370 images: CIPA standard (when a SanDisk 2 GB SD Memory Card is used) Approx. 125 minutes: Recorded in ! mode Approx. 295 minutes: Monitor on, continuous playback i Until battery pack runs - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 241
hr. 25 min. 64 hr. 53 min. 130 hr. 12 min. i If the continuous recording time of a voice memo exceeds about 13 hours, or of a video clip whose resolution setting is l exceeds about 5 hours 30 minutes, the recorded file is saved once, and the recording continues in a new file. When recording - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 242
SPECIFICATIONS Docking station Part number Power supply Rated output Ambient environment Dimensions Weight Temperature Humidity PDS-HD1010 DC 5V (3.0 oz.) Remote control unit Part number Power supply Dimensions Weight BRC-C3 Lithium battery (CR2025) 35 (W) × 56.6 (H) × 6.5 (D) mm 1.38 (W) × - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 243
Battery charge Slow error or rise in internal Red Flashing temperature During self- Fast timer photography Very fast Accessing card Blue LED indicator Blue LED indicator The blue LED indicator lights during certain operations, such as when the camera is turned ON or OFF, when saving video - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 244
SPECIFICATIONS Supplied AC adaptor Part number Power source Rated output Ambient Temperature environment Humidity Dimensions Weight (without power cord) VPCHD1010 Power cord VPCrated value HD1010EX dealer for details. Supplied Li-ion battery pack Model number Voltage Capacity Ambient - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 245
or in part, without prior written permission. i All images and illustrations given in this manual are for explanation purposes and may differ slightly from that of the actual product. Also, actual specifications are subject to change without prior notice and therefore may differ from the contents of - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 246
up and ready to go i Sanyo Electric shall not be held responsible for any problems resulting from the use of this camera. i Sanyo Electric declines all responsibility for damages due to improper use of the camera, failure to adhere to the instructions given in this manual, or repairs or changes done - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 247
1 The [ ] button was pressed all the way in one step. 2 After the image was focused, the subject moved. h Even if camera focuses the subject once, if the distance between the camera and the subject is changed, the subject may become out of focus. 3 The focus setting is not set for the correct - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 248
the subject is automatically determined when you press the [ ] button halfway. In contrast to this, with the manual focus mode, you manually set the focus by specifying the correct distance between the camera and the subject before taking the picture. k How to photograph a moving subject 1 Set the - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 249
a better picture by using the flash, for example, or changing the exposure compensation setting. Photographing moving subjects (sports mode a) Points: i Match the camera's movement with that of the subject. i Set the zoom to the Wide end (wide-angle). i Don't be too hesitant to press the [ ] button - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 250
scenery, it's better to use the optical zoom. Using the digital zoom produces a coarser image. Hold the camera securely, keeping your elbows close to your body and making sure the camera is stable. Taking care to stabilize the camera will increase the likelihood of getting a clear photo. i Don - Sanyo VPC HD1 | Instruction Manual, VPC-HD1010EX - Page 251
SANYO Electric Co., Ltd.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
-
129
-
130
-
131
-
132
-
133
-
134
-
135
-
136
-
137
-
138
-
139
-
140
-
141
-
142
-
143
-
144
-
145
-
146
-
147
-
148
-
149
-
150
-
151
-
152
-
153
-
154
-
155
-
156
-
157
-
158
-
159
-
160
-
161
-
162
-
163
-
164
-
165
-
166
-
167
-
168
-
169
-
170
-
171
-
172
-
173
-
174
-
175
-
176
-
177
-
178
-
179
-
180
-
181
-
182
-
183
-
184
-
185
-
186
-
187
-
188
-
189
-
190
-
191
-
192
-
193
-
194
-
195
-
196
-
197
-
198
-
199
-
200
-
201
-
202
-
203
-
204
-
205
-
206
-
207
-
208
-
209
-
210
-
211
-
212
-
213
-
214
-
215
-
216
-
217
-
218
-
219
-
220
-
221
-
222
-
223
-
224
-
225
-
226
-
227
-
228
-
229
-
230
-
231
-
232
-
233
-
234
-
235
-
236
-
237
-
238
-
239
-
240
-
241
-
242
-
243
-
244
-
245
-
246
-
247
-
248
-
249
-
250
-
251
 |
 |
VPC-HD1010EX
VPC-HD1010
VPC-HD1010GX
INSTRUCTION MANUAL
Digital Movie Camera
Please read these instructions carefully before using the camera.
Make sure to read and understand the separate booklet “SAFETY MANUAL”.
Keep this manual in a safe place for later reference.
Important note
This manual explains how to safely operate the VPC-HD1010EX,
VPC-HD1010 and VPC-HD1010GX.
Any information regarding only one of these products will be labeled as such.