Sanyo VPC HD1 Instruction Manual, VPC-HD1010EX - Page 134
Select the desired icon from the, exposure menu, and press the, SET button., <If, selected>,
UPC - 086483059766
View all Sanyo VPC HD1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
EXPOSURE SETTING 2 Select the desired icon from the exposure menu, and press the SET button. 1 Toggle the SET button up or down to select aperture value or shutter speed. 2 Toggle the SET button left or right to change the setting for the selected parameter. F1.8 1/250 Shutter speed Aperture 3 Press the SET button. h This completes the exposure setting. HINT i To prevent the effects of camera shake at slow shutter speeds, it is recommended to use a tripod or other method to stabilize the camera. i A slow shutter speed may be useful for photographing in a darker environment, but noise in the image may be increased. i To minimize noise in the image, enable the noise reduction function (page 153). i The exposure setting automatically becomes @ if the scene select function is active. i When the exposure setting is set to , and the aperture size is set to 4.7 or less, the shutter speed cannot be set to 1/500. i In the sequential shots mode, the shutter speed is faster than 1/15 sec. i Even if the shutter speed is set to slower than 1/29 sec., the shutter speed during video clip recording is 1/30 sec. i If the exposure setting is set to T, g or H, by assigning an operation shortcut to the SET button (page 151), you can select the T, g or H exposure setting from the Shooting Screen. 115 English