Sanyo VPC HD1 Instruction Manual, VPC-HD1010EX - Page 200

PLAYING BACK ON A TV i After connecting the camera to the television, switch the TV input to the terminal to which the camera is connected. i When the camera is connected to a TV, no image appears on the camera's monitor. i The playback method is the same as when viewing images on the camera's monitor. Audio playback: see page 97 i The remote control unit can be used for playback (page 82). i The same playback procedure as when playing back with the camera is used to play back audio recordings as well. i Use the TV controls to adjust the playback volume. The camera's controls will not work to adjust the volume. i If the camera set in the docking station is in the sleep mode, press the operation mode button on the docking station, or the ON/OFF button on the remote control unit, to turn the camera on. CAUTION Insert and pull out the cable carefully i When connecting the cables, make sure that the cable plugs are correctly oriented and that they match the shapes of the terminal sockets on the devices. Push the plugs in straight when connecting them. If undue force is used to connect a cable, it may permanently damage the connector pins in the terminal socket. i Do not use excessive force when connecting and disconnecting cables. HINT About the display when the "PAL" TV system is selected (page 160) and the supplied S-AV interface cable is used to connect the camera to the TV During recording: The image appears on the monitor only; it does not appear on the TV. During playback: The image appears on the TV only; it does not appear on the monitor. 181 English