Schwinn 130 Upright Bike 2020 model Service Manual - Page 47
Using a 6mm hex wrench, remove the indicated hardware from
View all Schwinn 130 Upright Bike 2020 model manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Disconnect all power to the machine before you service it. Note: Your machine may not match the image. For reference only. 1. Remove the four screws that attach the Console to the Mast. Carefully lift the Console off the Mast. 2. Disconnect the Data Cable and Heart Rate Cable from the back of the Console, and remove it. Note: D o not let the cables fall down inside the Mast. This step may require two people. X4 #2 3. Flex the edges of the Upper Shroud to disengage the inside tabs from the Main Assembly, and slide it up the Console Mast. 4. Using a 6mm hex wrench, remove the indicated hardware from the Console Mast. Slightly pull the Console Mast upward, and disconnect the cables. Set the hardware, Shroud Cap, and Upper Shroud safely aside for reassembly. NOTICE: D o not pinch or cut the cables. This step may require two people. X4 6 mm 47