Schwinn 130 Upright Bike 2020 model Service Manual - Page 67
Put the replacement Handlebar in the bracket, adjust the Handlebar
View all Schwinn 130 Upright Bike 2020 model manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
5. Remove the T-handle and washers that attach the Handlebar to the Mast. Set them safely aside for reassembly. NOTICE: H old the Handlebar so that it does not fall. 6. Untie the string from the HR Cable. Remove the old Handlebar and discard it. 7. Put the replacement Handlebar in the bracket, adjust the Handlebar to the desired angle, and install the T-handle through the holes. NOTICE: Do not pinch or cut the cables. 67
67
5.
Remove the T-handle and washers that attach the Handlebar to the
Mast. Set them safely aside for reassembly.
NOTICE:
Hold the Handlebar so that it does not fall.
6.
Untie the string from the HR Cable. Remove the old Handlebar and
discard it.
7.
Put the replacement Handlebar in the bracket, adjust the Handlebar to
the desired angle, and install the T-handle through the holes.
NOTICE:
Do not pinch or cut the cables.