Schwinn 130 Upright Bike 2020 model Service Manual - Page 48

Cable from the Main Frame.

Get Schwinn 130 Upright Bike 2020 model PDF manuals and user guides View all Schwinn 130 Upright Bike 2020 model manuals
Add to My Manuals
Save this manual to your list of manuals

Page 48 highlights

5. Tie the length of string to the end (A) of the Data Cable at the base of the Mast. Hold the other end of the Data Cable (B) and B carefully pull it out of the Mast so that the string extends through A the length of the Mast. Untie the string from the old Data Cable and discard the old cable. NOTICE: D o not pinch or cut the HR cable (C). C 6. Tie the end of the string at the base of the Mast to one end of the replacement Data Cable. Hold the other end of the string and carefully pull the new Data Cable through the Mast. NOTICE: Do not pinch or cut the cables. 7. Untie the string from the Data Cable and connect the cable to the Data Cable from the Main Frame. . NOTICE: D o not pinch or cut the cables. This step may require two people. 8. Using a 6mm hex wrench, install the Console Mast, Mast Gasket and Top Shroud to the Main Assembly NOTICE: M ake sure the Console Cable does not fall into the Console Mast. Align the clips on the cable connectors and make sure the connectors lock. Do not pinch or cut the Console Cable. Be sure the tabs on the Top Shroud snap into the Main Assembly. X4 6 mm 48

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
48
5.
Tie the length of string to the end (A) of the Data Cable at the
base of the Mast. Hold the other end of the Data Cable (B) and
carefully pull it out of the Mast so that the string extends through
the length of the Mast. Untie the string from the old Data Cable and
discard the old cable.
NOTICE:
Do not pinch or cut the HR cable (C).
6.
Tie the end of the string at the base of the Mast to one end of the
replacement Data Cable. Hold the other end of the string and carefully pull
the new Data Cable through the Mast.
NOTICE:
Do not pinch or cut the cables.
7.
Untie the string from the Data Cable and connect the cable to the Data
A
B
C
6 mm
X4
Cable from the Main Frame.
.
NOTICE:
Do not pinch or cut the cables. This step may require two people.
8.
Using a 6mm hex wrench, install the Console Mast, Mast Gasket and Top Shroud to the Main Assembly
NOTICE:
Make sure the Console Cable does not fall into the Console Mast. Align the clips on the cable connectors and make sure the connec-
tors lock. Do not pinch or cut the Console Cable. Be sure the tabs on the Top Shroud snap into the Main Assembly.