Sharp DT-200L Operation Manual - Page 24

Setup & Connections Image Projection Rear Projection • Place a translucent screen between the projector and the audience. • Use the projector's menu screen to reverse the projected image. (See page 42 for use of this function.) • Optimal image quality can be achieved when the projector is positioned perpendicular to the screen with all feet flat and leveled. Projection Using a Mirror • When the distance between the projector and a screen is not sufficient for normal rear projection, you can use a mirror to reflect the image onto the screen. • Place a mirror (normal flat type) in front of the lens. • Project the normal image onto the mirror. • The image reflected from the mirror is projected onto the translucent screen. CAUTION • When using a mirror, be sure to carefully position both the projector and the mirror so the light does not shine into the eyes of the audience. Ceiling-mount Projection • It is recommended that you use the optional Sharp ceiling-mount bracket for this installation. • Before mounting the projector, remove the Swivel Stand. (See page 17 for removing and attaching the Swivel Stand.) • Before mounting the projector, contact your nearest Sharp Authorized Service Center or Dealer to obtain the recommended ceiling-mount bracket (commercially available). (AN-CM260 ceiling-mount bracket, AN-EP101B extension tube for AN-CM260.) • When the projector is in the inverted position, use the upper edge of the screen as the base line. • Use the projector's menu screen to select the appropriate projection mode. (See page 42 for use of this function.) E-23 DT-200(E)#p22_23.p65 23 02.11.21, 11:40 AM