Sharp DT-200L Operation Manual - Page 34
Adjusting the Computer and DVD/DTV Images
View all Sharp DT-200L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Adjusting the Computer and DVD/DTV Images 2,3,4 1, 5 When displaying computer patterns which are very detailed (tiling, vertical stripes, etc.), interference may occur between the DMD pixels, causing flickering, vertical stripes, or contrast irregularities in portions of the screen. Should this occur, adjust "Clock", "Phase", "H-Pos" and "V-Pos" for the optimum computer image. Description of Adjustment Items Selected item Clock Phase H-Pos V-Pos Reset Description Adjusts vertical noise. Adjusts horizontal noise (similar to tracking on your VCR). Centers the on-screen image by moving it to the left or right. Centers the on-screen image by moving it up or down. All computer image adjustment items are returned to the factory preset settings. On-screen Display 2 3 • "Clock", "Phase", "H-Pos" and "V-Pos" cannot be used in the DIGITAL INPUT mode and the Component mode. • Computer image adjustments can be made easily by pressing AUTO SYNC ( ) on the remote control. See page 35 for details. 1 Press MENU. The "Picture" menu screen appears. 2 Press / to display the "Fine Sync" menu screen. 3 Press / to select a specific adjustment item. 4 Press / to move the mark of the selected adjustment item to the desired setting. 5 To exit the menu screen, press MENU. • To reset all adjustment items, select "Reset" on the "Fine Sync" menu screen and press ENTER. • The adjustable area of each item may be changed according to the input signal. Basic Operation E-33 DT-200(E)#p33.p65 33 02.11.21, 11:44 AM