Sharp DT-200L Operation Manual - Page 26

Adjusting the Picture Aspect Ratio DVD / VIDEO Input Signal COMPUTER Image Type NORMAL Projects the image fully on a screen while maintaining the aspect ratio. Output screen image BORDER STRETCH Projects the image on Projects the image on the screen whose the screen whose upper surrounding areas are and lower areas are cut cut out to make a 4:3 out to make a 16:9 screen while maintaining screen while the image the aspect ratio. is horizontally enlarged. * * 4:3 aspect ratio * 480i 480P 540P NTSC PAL SECAM VGA (640x480) SVGA (800x600) XGA (1024x768) Letter Box * - * Squeezed 16:9 * Squeezed 4:3 image * 16 : 9 aspect ratio 720P 1080i - * Operation Buttons * Mode for projecting an image with the original aspect ratio without cutting any portions. Freeze Function FREEZE FREEZE button E-25 DT-200(E)#p24_25.p65 FREEZE END 25 : Cutout area on which images cannot be projected. : Area on which the image is not included in the original signals. This function allows you to instantly freeze a moving image. This is useful when you want to display a still image from a computer or video, giving you more time to explain the image to the audience. You can also use this function to display a still image from a computer while you make preparations for the next computer images to be presented. 1 Press FREEZE to freeze the image. 2 Press FREEZE again to return to the moving image. • The still image is cancelled should any of the following occur while the picture is frozen. • Pressing the INPUT button • Interruption of the video signal • Pressing the FREEZE button 02.11.21, 11:40 AM