Sharp DT-200L Operation Manual - Page 28

Menu Bars Items on the INPUT 1 or 2 Mode Menu Bar Main menu Sub menu Main menu Picture ( ) Contrast Bright Color Tint Sharp Red Blue Reset CLR Temp ‫מ‬30 ‫ם‬30 ‫מ‬30 ‫ם‬30 ‫מ‬30 ‫ם‬30 ‫מ‬30 ‫ם‬30 ‫מ‬30 ‫ם‬30 ‫מ‬30 ‫ם‬30 ‫מ‬30 ‫ם‬30 Gamma White Emphasis [ON/OFF] Picture Setting 5500k 6500k 7500k 8500k 9300k 10500k Standard Black Detail White Detail Brighten Memory 1 Memory 2 Memory 3 Memory 4 Memory 5 Memory OFF Language ( ) PRJ Mode ( ) Sub menu English Deutsch Español Nederlands Français Italiano Svenska Português Front Front‫ם‬Ceiling Rear Rear‫ם‬Ceiling Fine Sync ( ) Clock ‫מ‬30 ‫ם‬30 Phase ‫מ‬15 ‫ם‬15 H-Pos ‫מ‬30 ‫ם‬30 V-Pos ‫מ‬30 ‫ם‬30 Reset Special Modes Auto Sync [ON/OFF] Signal Info 640‫ן‬480 720‫ן‬480 Resolution Hor Freq Vert Freq 640‫ן‬480 37.5 kHz 72 Hz Options ( ) Digital Shift ‫מ‬30 ‫ם‬30 * Subtitle ‫מ‬10 ‫ם‬10 Reset Lamp Timer OSD Display [ON/OFF] Signal Type RGB Component Background Auto Power Off [ON/OFF] Menu Position Menu Color Blue None Center Upper Right Lower Right Upper Left Lower Left Opaque Translucent E-27 * The "Digital Shift" and "Subtitle" cannot be adjusted when Keystone correction is applied. • The resolution, vertical frequency and horizontal frequency figures displayed above are for example purposes only. • "Color", "Tint", and "Sharp" do not appear when "RGB" is selected in INPUT 2 mode. • Only the items highlighted in the tree charts above can be adjusted. • To adjust the items under the sub menu, press after selecting the sub menu. • "Signal Type" is not displayed when using INPUT 1. • "Contrast", "Bright", "Color", "Tint" and "Sharp", "Clock", "Phase", "H-Pos" and "V-Pos", and "CLR-Temp", "Gamma", "Special Modes" and "Auto Sync" cannot be used in the DIGITAL INPUT mode. • "Clock", "Phase", "H-Pos" and "V-Pos" cannot be used in the Component mode. Basic Operation DT-200(E)#p26_32.p65 27 02.11.21, 11:38 AM