Sharp DT-200L Operation Manual - Page 30

Adjusting the Picture 2, 3 1, 4 On-screen Display e. g. (VIDEO input in INPUT 3 or 4 mode) 1 2 You can adjust the projector's picture to your preferences with the following picture settings. To save the settings, select a memory from 1 to 5 and OFF (see page 32) and then adjust the settings. Description of Adjustment Items Selected item button button Contrast Brightness Color Tint Sharp Red Blue CLR Temp Gamma White Emphasis Picture Setting Reset For less contrast For more contrast For less brightness For more brightness For less color intensity For more color intensity Skin tones become purplish Skin tones become greenish For less sharpness For more sharpness For weaker red For stronger red For weaker blue For stronger blue For selecting a desired item from six color temperature settings For selecting a desired item from four gamma positions For switching "on" or "off" the function that emphasizes bright portions of the image For storing all items set in "Picture" All image adjustment items are returned to the factory preset settings. • "Color", "Tint" and "Sharp" do not appear for RGB input in INPUT 2 mode. • For details on "Gamma", see "Gamma Correction Function" on page 31. • For details on "CLR Temp", see "Adjusting the Color Temperature" on page 30. • For details on "White Emphasis", see "Description of White Emphasis" on page 30. • For details on "Picture Setting", see "Picture Setting Function" on page 32. 1 Press MENU. The "Picture" menu screen appears. 2 Press / to select a specific adjustment item. 3 Press / to move the mark of the selected adjustment item to the desired setting. 4 To exit the menu screen, press MENU. • To reset all adjustment items, select "Reset" on the "Picture" menu screen and press ENTER. • "Tint" cannot be used with PAL, SECAM, PAL-M, PAL-N or PAL-60. • "Contrast", "Bright", "Color", "Tint" and "Sharp" cannot be used in the DIGITAL INPUT mode. Basic Operation E-29 DT-200(E)#p26_32.p65 29 02.11.21, 11:38 AM