Sharp FP-R65CX Operation Manual - Page 12
Pour water in to the Tank
View all Sharp FP-R65CX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
PREPARATION Pour water in to the Tank This product can be used as an air purifier without putting water in the tank. 1 Hold the tank handle and remove the tank. Tank Handle 2 Remove the tank cap and pour water. • Use drinkable tap water. (Generally speaking, tap water is sterilized with chlorine to suppress propagation of bacteria.) • Change the tank water every day with fresh tap water. Tank Cap Tank Tank 3 After supplying water, securely tighten the tank cap. • Check to see that there is no water leak. • Be sure to wipe off any excess water around the tank. • When carrying the tank, hold it with both hands so that the tank opening is facing up. Tank Cap 4 Mount the tank to the main unit. • Insert the tank cap into the dented part of the unit. • Make sure the tank is firmly attached by pushing it in until you hear a click. CAUTION • Do not expose the unit to water. Short circuit and/or electrical shock may occur as a result. • Do not use hot water (of 40°C or higher), chemical agents, aromatic substances, dirty water, etc. Deformation and/or malfunction may occur as a result. • Do not use mineral water, ionized alkaline water, well water, purified water, etc. Propagation of mold fungus and bacteria may occur as a result. • Securely tighten the tank cap. If the tank cap is difficult to tighten, loosen the cap one full turn to properly set the cap to the tank. E-10