Sharp FP-R65CX Operation Manual - Page 14

OPERATION MAIN UNIT OPERATION Pollen Mode Indicator Light AUTO Operation Indicator Light Main Unit Controls • AUTO • POLLEN • SILENT • MEDIUM • MAX Mode Selection Button Power ON/OFF Button Fan Speed Indicator Light 1 Power ON/OFF Button • Used to start operation (short beep) and stop operation (long beep) • Plasmacluster Indicator Light and Fan Speed Indicator Light turn on/off. • Unless unplug the power cord, the operation starts in the previous mode the unit was operated in. 2 MODE Selection Button • The operation mode can be switched. AUTO operation The fan speed is automatically switched (HIGH*, MEDIUM, SILENT) depending on the amount of impurities in the air. The sensors detect the impurities for efficient air purification. POLLEN mode operation The unit will operate at HIGH* fan speed for 10 minutes, then will alternate between MEDIUM and HIGH* for 20 minutes. 10 minutes: HIGH fan speed 20 minutes: MEDIUM fan speed 20 minutes: HIGH fan speed * HIGH fan speed is an intermediate speed between MEDIUM and MAX. E-12 MAX operation The unit will operate at a fan speed of MAX. MEDIUM operation The unit will operate at a fan speed of MEDIUM. SILENT operation The unit will operate quietly using minimal air intake.