Sharp HTSB200 HT-SB200 Operation Manual - Page 6

HT-SB200 Precautions ■ General ● Please ensure that the equipment is positioned in a well- ventilated area and ensure that there is at least 4" (10 cm) of free space along the sides and top of the equipment. 4" (10 cm) 4" (10 cm) 4" (10 cm) General Information ● Use the speaker on a firm, level surface free from vibration. ● Keep the speaker away from direct sunlight, strong magnetic fields, excessive dust, humidity and electronic/electrical equipment (home computers, facsimiles, etc.) which generate electrical noise. ● Do not place anything on top of the speaker. ● Do not expose the speaker to moisture, to temperatures higher than 140˚F (60˚C) or to extremely low temperatures. ● If your system does not work properly, disconnect the AC power cord from the AC outlet. Plug the AC power cord back in, and then turn on your system. ● In case of an electrical storm, unplug the speaker for safety. ● Hold the AC power plug by the head when removing it from the AC outlet, as pulling the cord can damage internal wires. ● The AC power plug is used as a disconnect device and shall always remain readily operable. ● Do not remove the outer cover, as this may result in electric shock. Refer internal service to your local SHARP service facility. ● This speaker should only be used within the range of 41˚F - 95˚F (5˚C - 35˚C). Warning: ● The voltage used must be the same as that specified on this speaker. Using this product with a higher voltage other than that which is specified is dangerous and may result in a fire or other type of accident causing damage. SHARP will not be held responsible for any damage resulting from use of this speaker with a voltage other than that which is specified. ● The supplied AC/DC adaptor contains no user serviceable parts. Never remove covers unless qualified to do so. It contains dangerous voltages, always remove mains plug from the main outlet jack before any service operation or when not in use for a long period. ● The AC/DC adaptor supplied with the HT-SB200 must not be used with other equipment. ● Never use an AC/DC adaptor other than the one specified. Otherwise, problem or serious hazards may be created. ■ Volume control The sound level at a given volume setting depends on speaker efficiency, location, and various other factors. It is advisable to avoid exposure to high volume levels, which occurs while turning the speaker on with the volume control setting up high, or while continually listening at high volumes. 6