Sharp LC 42D43U Operation Manual - Page 16
It is necessary to set the PC correctly to display XGA and WXGA signal. Refer to to set PC - resolution
UPC - 074000370166
View all Sharp LC 42D43U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Preparation You can use the INPUT 4 or INPUT 5 terminal when connecting HDMI cable (commercially available) HDMI equipment. • When using an HDMbDVI conversion cable, input the audio signal to AUDIO terminal of INPUT 5. • When receiving an incompatible signal, such as 1080p, the message below appears without the image on the screen. For an incompatible video signal: "An incompatible video signal has been received. Check the output device settings." For an incompatible audio signal: "An incompatible audio signal has been received. Check the output device settings." When connecting to a PC with an analog RGB terminal. (INPUT 6) RGB cable (commercially available) © 3.5 mm stereo minijack PC cable (commemially available) When connecting to a PC with an NDMI terminal. HDMI cable (commercially available) (INPUT 4 or 5) PC • The HDMI terminals only support digital signal. It is necessary to set the PC correctly to display XGA and WXGA signal. Refer to page 38 to set PC input signals. PC Resolution Horizontal Frequency Vertical Frequency VESA Standard 720 x 400 31.5 kHz 70 Hz 31.5 kHz 60 Hz O VGA 640 x 480 37.9 kHz 72 Hz O 37.5 kHz 75 Hz O 35.1 kHz 56 Hz O 37.9 kHz 60 Hz O SVGA 800 x 600 PC 48.1 kHz 72 Hz O 46.9 kHz 75 Hz O 48.4 kHz 60 Hz O XGA 1024 x 768 56.5 kHz 70 Hz O 60.0 kHz 75 Hz O WXGA 1360 x 768 47.7 kHz 60 Hz O DDC is a registered trademark of Video Electronics Standards Association. Power Management is a registered trademark of Sun Microsystems, Inc. VGA and XGA are registered trademarks of International Business Machines Corp. Q-15