Sharp LC 42D43U Operation Manual - Page 30
ENTER, ENTER., Dolby Digital
UPC - 074000370166
View all Sharp LC 42D43U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Basic adjustment settings Power control setting allows you to save energy. No signal off When set to "Enable", the power will automatically shut down if there is no signal for 15 minutes. Press MENU to display the MENU screen, and then press _11/1_to select "Power Control". Press A/Y to select "No Signal Off", and then press ENTER, Press _1/1_ to select "Enable", and then press ENTER. This setting allows you to optimize the settings of Digital broadcasting. You can output digital audio to an AV amplifier or similar device whose DIGITAL AUDIO INPUT terminal is connected to the DIGITAL AUDIO OUTPUT terminal on the TV. Please select an audio output format compatible with the audio format of the program you are watching and the equipment connected. Press MENU to display the MENU screen, and then press 41/1_ to select "Digital Setup". Press A/Y to select "Audio Setup", and then press ENTER, Press A/Y to select "PCM" or "Dolby Digital", and then press ENTER. ,, Five minutes before the power shuts down, the remaining time displays every minute. Press MENU to exit. • "Disable" is the factory preset value. ,, When a TV program finishes, this function may not operate. No operation off When set to "Enable", the power will automatically shut down if there is no operation for 3 hours. Press MENU to display the MENU screen, and then press _11/1_to select "Power Control". Press A/Y to select "No Operation Off", and then press ENTER. Press _1/_ to select "Enable", and then press ENTER, ,_ Five minutes before the power shuts down, tile remainingtime displays every minute. Press MENU to exit. PCM The optical output terminal outputs audio signal in PCM form. Ifyour digital audio systemdoes not support Dolby Digital, select "PCM". Dolby Digital The optical output terminal outputs audio signal in Dolby Digitalform. It reproduces sound from surround program of digital. Press MENU to exit. ,, "Disable" is the factory preset value. Q- 29