Sharp LC-60LE810UN LC-40LE810UN LC-46LE810UN LC-52LE810UN LC-60LE810UN - Page 27

On-Screen Display Menu Color Temp. (Color Temperature) For a better white balance, use color temperature correction. High: White with bluish tone Mid-High: Middle: Mid-Low: Low: White with reddish tone White balance can be adjusted between a maximum of +30 and a minimum of -30 for each color temperature. R Gain (LO/HI): -30 through +30 G Gain (LO/HI): -30 through +30 B Gain (LO/HI): -30 through +30 • For resetting all adjustment items to the factory preset values, press a/b to select "Reset", and then press ENTER. Motion Enhancement Use Motion Enhancement to view fast-action video more clearly. 120Hz High/120Hz Low: For obtaining a clearer image. Off: Normal image. • "Motion Enhancement" may cause image noise. If this occurs, turn the function "Off". • When AV MODE is set to "GAME" or PC format is being input, "Motion Enhancement" is not available. Active Contrast Automatically adjusts the image contrast according to the scene. On: Automatically adjusts the image contrast. Off: No adjustment. Gamma Adjustment Adjusts the differences of picture tones between bright parts and dark parts. The adjustment range of the gamma can be set to a maximum of +2 and a minimum of -2 by pressing c or d. Black Level Adjusts on-screen black level to your preferred level. High: The black level gets brighter. Low: The black level gets darker. Digital Noise Reduction Produces a clearer video image. Auto: Automatically adjusts the level of noise reduction. High/Middle/Low: Select a desired level for viewing a clearer video image. Off: No adjustment. • "Digital Noise Reduction" is not available during PC format input. • When AV MODE is set to "GAME", "Auto" is not available. 3D-Y/C Provides high quality images with minimal dot crawl and cross color noise. Slow: For still images. Standard: Normal adjustment. Fast: For moving images. • "3D-Y/C" is available for input signal from Composite Video and analog broadcasts (air and cable). Monochrome For viewing a video in monochrome. On: For viewing in monochrome. Off: Normal color. Range of OPC The brightness level range of the OPC sensor's automatic adjustments can be set according to your preferences. The adjustment range of the OPC sensor can be set to a maximum of +16 and a minimum of -16. Max.: -15 through +16 Min.: -16 through +15 • The "Range of OPC" settings are active only when "OPC" is set to "On". • The maximum setting cannot be set to a smaller number than the minimum setting. • The minimum setting cannot be set to a bigger number than the maximum setting. • Depending on the brightness of the surrounding light, the OPC sensor might not operate if the adjustment range is small. • "Black Level" is available for input signal from Composite Video, Component 480i and analog broadcasts (air and cable). Film Mode (3:2 pull-down) Automatically detects a film-based source (originally encoded at 24 frames/second), analyzes it then recreates each still film frame for high-definition picture quality. Advanced(High)/Advanced(Low): Select a desired level to remove jerkiness from film contents. Standard: Detects, analyzes, converts film source. Off: Normal viewing mode. • "Film Mode" does not function when you set AV MODE to "GAME". • "Standard" does not function when channel display shows an input signal resolution of 480p, 720p, or 1080p. • "Film Mode" is not available during PC format input. 25