Sharp LC-70LE650U Operation Manual - Page 41

Other Viewing Options Using AQUOS LINK Operating the Connected Equipment To operate the connected equipment, press STB, DVD•VCR or AUDIO to select your device. (STB (cable/satellite set-top box), BD, DVD, VCR or AUDIO.) The remote control unit button will function as follows. • When you operate VCR, DVD or BD, press INPUT to select the terminal connected to your device. • CABLE and SAT cannot be selected at the same time. 1 2 7 3 8 4 9 5 10 6 11 12 13 14 1 POWER (SOURCE) • Turns the connected equipment power on and off. 2, • Starts playback. (VCR, BD, DVD) 3 * • Rewinds the tape and allows picture search. (VCR) • Hold down to go in reverse. (BD, DVD) 4+ • Stops the tape transport. (VCR) • Playback stops when pressed. With some Blu-ray disc/DVD players, pressing the button twice may open the disc tray. (BD, DVD) 5. • Pressing quickly once takes you to the start of the chapter currently playing. Each time you press it, you move back to the start of the previous chapter. (BD, DVD) 6 0-9, • (DOT) • Press a button (or buttons) that corresponds to the channel that you wish to watch.(STB) 7• Rapidly advances the tape and allows picture search. (VCR) • Hold down to fast forward. (BD, DVD) 8) • Sets pauses and still pictures. (VCR, BD, DVD) 9/ • Pressing quickly once takes you to the start of the next chapter. Each time you press it, you move ahead to the start of the next chapter. (BD, DVD) 10 (REC • Starts recording. (VCR) 11 FLASHBACK • Press to switch between the current channel and the channel you were watching immediately before. Some manufacturers do not preset FLASHBACK. (STB) 12 CHU/V • Press CHU or CHV to tune in to a higher or lower channel. (STB) • Press to select the channel of the TV tuner on the VCR. (VCR) 13 MENU • When this button is pressed, the BD/DVD menu will display. (BD, DVD) 14 a/b/c/d, ENTER • a/b/c/d: Press the button to select items on the STB GUIDE screen or STB MENU screen. (STB) Press the button to select items on the BD/DVD menu screen. (BD, DVD) • ENTER: Press to activate the selected function. (STB, BD, DVD) Controlling HDMI Equipment Using AQUOS LINK What's AQUOS LINK? • Using the HDMI CEC (Consumer Electronics Control) protocol, with AQUOS LINK you can interactively operate compatible system equipment (Blu-ray disc equipment, AV amplifier, DVD). • By connecting AQUOS LINK-compatible devices with HDMI-certified cables to the TV, you can control a recorder or AV amplifier using the remote control of the TV. • AQUOS LINK allows you to operate the HDMI-connected equipment with one remote control. Connecting AQUOS BD player via AQUOS LINK-compatible audio system HDMI-certified cable * * Use HDMI IN 1 to connect ARC-compatible equipment. Example HDMI-certified cable Optical fiber cable AQUOS BD player AQUOS LINK-compatible audio system Back panel horizontal inputs Back panel vertical inputs NOTE • For connecting the TV to AQUOS LINK-compatible equipment, use commercially available cables. • Point the remote control toward the TV, not to connected HDMI equipment. • Video noise may occur depending on the type of HDMI cable used. Make sure to use an HDMI-certified cable. • Up to 3 pieces of HDMI recording equipment and one AV amplifier can be connected using this system. • These operations affect the HDMI equipment selected as the current input source. If the equipment does not operate, turn on the equipment and select the appropriate input source using INPUT. • The AQUOS LINK feature may not operate properly when an HDMI splitter or AV selector unit is used. These devices may cause interruptions to the image and/or sound. Connected AQUOS LINK-compatible devices can be operated without changing the settings of the remote control unit. The OPTION button will function only when AQUOS LINK is used. ■ One Touch Play While the TV is in standby mode, it automatically turns on and plays back the image from the HDMI source. ■ One Touch Recording Press (REC while you are viewing a broadcast received with the AQUOS LINK-compatible recorder. The AQUOS LINK automatically recognizes the connected HDMI device and starts recording. ■ Single remote control The AQUOS LINK automatically recognizes the connected HDMI device and you can control the TV and the devices as if using a universal remote control. ■ Control the AQUOS LINK-compatible audio system Set the volume of AQUOS LINK-compatible audio system. NOTE • The above description is an example of the AQUOS LINK function. • The steps in "AQUOS LINK Setup" on page 40 need to be completed beforehand. • Refer to this operation manual and the operation manual of the AQUOS LINK device to be used with this TV. 39