Sharp LC-70LE650U Operation Manual - Page 55

Appendix ■ LC-80LE857U/LC-80LE757U/LC-80LE657U/LC-80LE650U/LC-80C6500U The wall mount kit (sold separately) allows you to mount the LCD Monitor on the wall. For detailed information on installing the wall mount, see the instructions provided with the product. We recommend you to contact a technician for assistance when installing it. SHARP is not responsible for any damage to the product or injury to yourself or others if you elect to install the wall mount on your own. CAUTION • Install your wall mount on a solid wall perpendicular to the floor. When you want to attach the wall mount to surfaces other than plaster board, please contact your nearest retailer/adviser for additional information. If you install the LCD Monitor on a ceiling or slanted wall, it may fall and result in severe personal injury. Always have two people mount the LCD Monitor on a wall. Wall Mount Kit Specifications Standard dimensions for wall mount kits are shown below. • The illustration is based on the LC-80LE857U model as an example. a1 a2 WALL MOUNT KIT WALL WALL MOUNT KIT WALL MOUNT UNIT SCREW CABINET MOUNTING HOLES DEPTH OF MOUNTING HOLES For the screws, refer to the table shown below. Standard screws Length(Depth of mounting holes) Quantity M8 (Use 1.25 pitch screws.) 31/64 (12) 4 pcs. NOTE • Do not mount the LCD Monitor at a tilt. • Due to the terminal configuration on this LCD Monitor, when you wall-mount this model, make sure there is enough space between the wall and the LCD Monitor for the cables. • To use this LCD Monitor mounted on a wall, remove the cable tie as needed. • Do not use screws that do not comply with the VESA standard screw specifications. • Do not use screws that are longer than the standard length. Screws that are too long may cause damage to the inside of the LCD Monitor. • Do not fasten the screws too firmly or loosely. This may damage the product or cause the product to fall, leading to personal injury. SHARP is not liable for these kinds of accidents. • SHARP is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions. Do not install the wall mount kit while your LCD Monitor is turned on. It may result in personal injury due to electric shock. B b1 b2 b3 A c1 VESA screw hole specs (A-B) Width a1: Maximum distance from the mounting hole a2: Maximum distance from the Monitor's center b1: Distance between the Monitor's center and the mounting hole Height b2: Maximum distance from the Monitor's center b3: Maximum distance from the mounting hole c1: Minimum gap 23 5/8 (600) - 15 3/4 (400) 2 61/64 (75) 14 49/64 (375) 7 3/4 (200) 13 19/32 (345) 5 23/32 (145) 3 5/32 (80) 53