Sharp LC-70LE650U Operation Manual - Page 52

Appendix ■ LC-80LE757U 1 Confirm that there are 12 screws (6 long screws, 4 middle screws and 2 short screws) supplied with the stand unit. 2 1

Set the post for the stand unit onto the polystyrene foam. 2 Attach the base to the post. 3
Insert and tighten the 6 screws into the 6 holes on the bottom of the base. • Hold the stand unit securely with one hand, and then tighten the screws. Long screws 3 2 1 1 FRONT 3 Build the work table. (See page 49.) 4 Insert the stand into the openings on the rear of the TV. • Make sure that the stand is firmly inserted into the TV. Improper installation may result in tilting of the TV set. Soft cushion 6 1 Insert the stand cover. 2 Insert the 2 screws to secure the stand cover. Short screws 2 1 1 ■ LC-80LE657U/LC-80LE650U/LC-80C6500U 1 Confirm that there are 12 screws (8 long screws and 4 short screws) supplied with the stand unit. 2 1

Set the post for the stand unit onto the polystyrene foam. 2 Attach the base to the post. 3
Insert and tighten the 8 screws into the 8 holes on the bottom of the base. • Hold the stand unit securely with one hand, and then tighten the screws. Long screws 3 2 1 1 FRONT 3 Build the work table. (See page 49.) 4 1
I
nsert the stand into the openings on the bottom of the TV. • Make sure that the stand is firmly inserted into the TV. Improper installation may result in tilting of the TV set. 2 Insert and tighten the 4 screws into the 4 holes on the rear of the TV. Soft cushion 2 Short screws 2 1 1 5 Insert and tighten the 4 screws into the 4 holes on the rear of the stand unit. Middle screws 50 • In the installation procedure, be careful not to catch your fingers between the TV set and the floor. • Do not remove the stand from the TV unless using an optional wall mount bracket to mount it. • After attaching the stand to the TV, do not hold the stand when you put up, set up, move or lay down the TV.