Sharp LC-70LE650U Operation Manual - Page 42

Using AQUOS LINK AQUOS LINK Setup Make the settings to use AQUOS LINK. Set the settings with "System Options" > "AQUOS LINK Setup". For operating the on-screen display menu, see page 20. AQUOS LINK Control Select AQUOS LINK Control to disable the AQUOS LINK function even when an AQUOS LINKcompatible HDMI device is connected to the TV. This function prevents the device from starting to operate unexpectedly. Auto Power On If this is activated, the One Touch Play function is enabled. While the TV is in standby mode, it automatically turns on and plays back the image from the HDMI source. Selecting Recorder When multiple AQUOS LINK-compatible devices are connected, this function allows you to set the recorder for recording when you press (REC on the TV's remote control unit. Press a/b to select the recorder for recording. Channel Select Key This function can be set for each input terminal. The remote control unit of the TV can be used to select the channel, display program information, and perform other operations of the connected AQUOS LINK-compatible equipment. Audio Return Channel This function allows you to listen to the TV audio via audio equipment without using an optical fiber cable, which conventionally is required. Requirements for using an ARC-compatible AV amplifier: • ARC-compatible AV amplifier connected to the ARC- compatible HDMI IN terminal (HDMI IN 1). (Refer to the operation manual of the ARC-compatible equipment for details.) • Use of an ARC-compatible cable. Auto: You can listen to the TV audio with ARCcompatible audio equipment. Off: This function does not work. NOTE • If the TV audio cannot be output from the AV amplifier even after making the necessary settings, connect the TV to the AV amplifier with an optical fiber cable and select "Off". One Touch Playback AQUOS LINK allows you to operate the HDMIconnected equipment with one remote control. Press d to start playing back a title. • The last played program is played back. You can use the following buttons during broadcast viewing. Buttons Description POWER (SOURCE) * , + ) 7 8 Turns the power of the HDMI connected devices on and off. Hold down this button to go in reverse. Starts playback. Hold down this button to fast forward. Stops playback. Sets pauses and still pictures. Pressing quickly once takes you to the start of the chapter currently playing. Each time you press it, you move back to the start of the previous chapter. Pressing quickly once takes you to the start of the next chapter. Each time you press it, you move ahead to the start of the next chapter. One Touch Recording This function allows easy one-touch recording of the program being viewed on the TV to AQUOS LINKcompatible equipment with a recording function by simply pressing (REC on the remote control. Prepare the connected AQUOS LINKcompatible recorder for recording. Check the following items. • Make sure that the antenna cable is connected. • Check that there is sufficient available space on the recording media (HDD, DVD, etc.). • On the TV, use "AQUOS LINK Setup" and "Selecting Recorder" to select the equipment for recording. • By default, the recorder connected to HDMI IN 1 is selected for recording. 1 Press (REC to start recording. • When you are viewing a broadcast received with the AQUOS LINK-compatible recorder selected in "Selecting Recorder", recording to the AQUOS recorder of the broadcast being viewed starts. • When you are viewing a broadcast received with equipment other than the AQUOS LINKcompatible recorder selected in "Selecting Recorder" or other external input equipment, pressing (REC on the remote control does not start recording. 2 Use the Link Operation Menu to stop recording. 1Press OPTION to display the Link Operation Menu screen. 2Press a/b to select "Stop Recording", and then press ENTER. NOTE • The buttons 7/8 do not function with the following Blu-ray disc players currently available. - BD-HP20U, BD-HP50U Link Operation Menu Link Operation Link Operation Menu Link Operation Link Operation Menu Recorder Power On/Off Device Operation panel Play from Rec. List Show Start Menu Change Media of Device Link Booking (Rec. Book) Change Audio Output Device [By AQUOS SP] Change Surround Mode HDMI Device Selection AQUOS LINK Setup Start Recording Stop Recording The Link Operation Menu allows you to make adjustments during operation of AQUOS LINKcompatible equipment. 1 Press OPTION to display the Link Operation Menu. 2 Press a/b to select the desired item, and then press ENTER. • Specific operations differ depending on the item you select. Following are the basic operations for each item. Recorder Power On/Off You can manually turn on/off the power of the connected AQUOS LINK-compatible equipment. Each time you press ENTER, the connected equipment switches on or off. 40