Sharp MX-M232D Operation Guide - Page 93
Misfeed Removal
View all Sharp MX-M232D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
MISFEED REMOVAL When a misfeed occurs during copying, the message " Clear paper path." and the location of the misfeed will appear. Check the location and remove the misfeed. Note The paper may tear when you remove a misfeed. In this event, be sure to remove all torn pieces of paper from the machine, taking care not to touch the photoconductive drum (the green part). Any scratches or damage to the surface of the drum will cause dirty copies. (p.94) (p.97) (p.98) (See below) (p.94) (p.93) (p.98) (p.98) (p.98) Misfeed locations in the optional 2 x 250-sheet paper feed unit (p.98) (p.98) MISFEED IN THE SPF/RSPF 1 Remove the misfed original. Check sections A, B, and C in the left shows the illustration (see the next page), and remove the misfed original. Section B Open the SPF/RSPF and rotate the two release rollers in the direction of the arrow to feed the original out. Close the SPF/RSPF and then remove the original. Section A Open the feeding roller cover and remove the misfed original from the document feeder tray. Close the feeding roller cover. Feeding roller cover Roller 6 If a small original (A5 (5-1/2" x 8-1/2"), etc.) is misfed, open the right side cover and remove the original. Close the right side cover. Right side cover Downloaded from www.Manualslib.com manuals search engine 92