Sharp PN-A601 PN-A601 Professional LCD Monitor Operation Manual
Sharp PN-A601 Manual
View all Sharp PN-A601 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sharp PN-A601 manual content summary:
- Sharp PN-A601 | PN-A601 Professional LCD Monitor Operation Manual - Page 1
PN-A601 LCD MONITOR OPERATION MANUAL - Sharp PN-A601 | PN-A601 Professional LCD Monitor Operation Manual - Page 2
IMPORTANT: To aid reporting in case of loss or theft, please record the product's model and serial numbers in the space provided. The numbers are located in the rear of the product. Model No.: Serial No.: U.S.A. ONLY FOR CUSTOMERS IN U.K. IMPORTANT The wires in this mains lead are coloured in - Sharp PN-A601 | PN-A601 Professional LCD Monitor Operation Manual - Page 3
user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING: FCC Regulations and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of - Sharp PN-A601 | PN-A601 Professional LCD Monitor Operation Manual - Page 4
used battery. "BATTERY DISPOSAL" THIS PRODUCT CONTAINS A LITHIUM PRIMARY (MANGANESS DIOXIDE) MEMORY BACK-UP BATTERY THAT MUST BE DISPOSED OF PROPERLY. PLEASE CONTACT YOUR LOCAL SHARP DEALER OR AUTHORIZED SERVICE REPRESENTATIVE FOR ASSISTANCE IN DISPOSING OF THIS BATTERY. U.S.A. AND CANADA ONLY E4 - Sharp PN-A601 | PN-A601 Professional LCD Monitor Operation Manual - Page 5
SHARP LCD product. To ensure safety and many years of trouble service life of your LCD product, please read the following precautions carefully before using the product. 1. Read instructions - All operating instructions must be read and understood before the product is operated. 2. Keep this manual - Sharp PN-A601 | PN-A601 Professional LCD Monitor Operation Manual - Page 6
spoil your clothing. In order to avoid these problems, make sure to observe the precautions below: • minus (-) sides of the batteries according to the instructions in the compartment. • Do not mix old reaction control in nuclear facility, medical life support system, and missile launch control in a - Sharp PN-A601 | PN-A601 Professional LCD Monitor Operation Manual - Page 7
INSTRUCTIONS - T he TFT color LCD it is broken or malfunctioning. Refer the servicing to the service representative. Manual Scope - Microsoft, Windows and Internet an authorized Sharp servicing dealer or service center. * Please contact your local Sharp servicing dealer or service center for - Sharp PN-A601 | PN-A601 Professional LCD Monitor Operation Manual - Page 8
requires special expertise and the work must be performed by an authorized SHARP dealer. You should never attempt to perform any of this work downward. • When mounting the monitor horizontally, the optional fan cover (PN-ZR31) is required. For details along with the horizontal mounting conditions, - Sharp PN-A601 | PN-A601 Professional LCD Monitor Operation Manual - Page 9
the Monitor with a PC (LAN 44 Settings to connect to a LAN 44 Controlling with a PC 46 Troubleshooting 52 Specifications 54 Mounting Precautions (For SHARP dealers and service engineers 59 Supplied Components If any component should be missing, please contact your dealer. Liquid Crystal - Sharp PN-A601 | PN-A601 Professional LCD Monitor Operation Manual - Page 10
4 5 6 1. LCD panel 2. Brightness sensor 21 When the PN-ZB01 (optional) is attached 22 23 24 25 26 27 28 30 31 29 Caution • Consult your SHARP dealer for attachment/ PN-ZB01 (optional) is attached 22. PC/AV DVI-D input terminal 23. PC/AV DVI-D output terminal 24. LAN terminal 25. External speaker - Sharp PN-A601 | PN-A601 Professional LCD Monitor Operation Manual - Page 11
. BRIGHT +/Cursor control ( ) button 11. VOL -/Cursor control ( ) button 12. SIZE button TIPS • You can use the remote control unit included with the PN‑ZR01 control kit (optional) in the same way as the remote control unit included with this monitor. nRemote control sensor box (Supplied with the - Sharp PN-A601 | PN-A601 Professional LCD Monitor Operation Manual - Page 12
manual of the equipment to be connected. • Be careful not to confuse the input terminal with the output terminal when connecting cables. Accidentally reversing cables connected to the input and output terminals may cause malfunctions and the other problems speakers or • When the PN-ZB01 (optional) - Sharp PN-A601 | PN-A601 Professional LCD Monitor Operation Manual - Page 13
terminal • Select the audio input terminal to be used in AV S-VIDEO of AUDIO SELECT on the OPTION menu. 1. Attach a speaker cable core (included with the PN-ZB01) to the end of the speaker cable connected to the monitor. 2. While pushing the tab, insert the tip of the cable. 3. Release the tab. 13 - Sharp PN-A601 | PN-A601 Professional LCD Monitor Operation Manual - Page 14
Connecting Peripheral Equipment ■ Connection with the control kit (optional) Caution • When attaching the remote control sensor box, turn the main power switch OFF. • Except for the remote control sensor box connection cable, do not insert any other cable into the control kit terminal. Also, do not - Sharp PN-A601 | PN-A601 Professional LCD Monitor Operation Manual - Page 15
to the top/bottom/left/right of the sensor. Remote control sensor 2. See the instructions in the compartment and put in the batteries (R-6 ("AA" size) x 2) with air conditioner, stereo components, etc. • Adjust the angle of the PN-ZR01 (optional) remote control sensor and have it face the area where operation - Sharp PN-A601 | PN-A601 Professional LCD Monitor Operation Manual - Page 16
Connecting the Power Cord Caution • Use only the power cord supplied with the monitor. 1. Turn off the main power switch. 2. Plug the power cord (supplied) into the AC input terminal. 3. Plug the power cord (supplied) into the AC power outlet. Main power switch 1 3 For power outlet 2 AC input - Sharp PN-A601 | PN-A601 Professional LCD Monitor Operation Manual - Page 17
Removing the Handles The handles can be removed. Remove the handle screws and remove the handles and handle spacers. Caution • The handles, handle screws and handle spacers are for this monitor. Do not use them for any other devices. • When attaching the handles, perform the steps for removing the - Sharp PN-A601 | PN-A601 Professional LCD Monitor Operation Manual - Page 18
when the power is turned on, the internal battery may be exhausted. Please contact your local Sharp servicing dealer or service center for assistance with battery replacement. • Estimated service life of the internal battery: About 5 years (depending on monitor operation) • The initial battery was - Sharp PN-A601 | PN-A601 Professional LCD Monitor Operation Manual - Page 19
HDMI input terminal*2 AV COMPONENT PC D-sub input terminal*1 AV VIDEO PC D-sub input terminal*1 Audio Audio input terminal *3 Audio input terminal When the PN-ZB01 (optional) is attached Input mode Video PC DVI-D PC/AV DVI-D input terminal*4 PC HDMI PC/AV HDMI input terminal*2 PC D-SUB - Sharp PN-A601 | PN-A601 Professional LCD Monitor Operation Manual - Page 20
Basic Operation nSwitching the screen size Even when the screen size is changed, the display may remain the same depending on the input signal. WIDE PC input Displays image so it fills the entire screen. ZOOM 1 AV input PC input AV input An image with a 4:3 aspect ratio is stretched to fill - Sharp PN-A601 | PN-A601 Professional LCD Monitor Operation Manual - Page 21
LEVEL 30 TINT 30 COLORS 30 SHARPNESS 12 RGB INPUT RANGE PC D-SUB FULL MOVE OSD···[DISPLAY] 1920x1080 V: 60 Hz H: 67.5 kHz OK···[MENU (e.g. Function not supported by the current input signal) nMenu Items The displayed menu items vary depending on whether or not the PN-ZB01 (optional) - Sharp PN-A601 | PN-A601 Professional LCD Monitor Operation Manual - Page 22
signals. TINT Adjusts the hue. Selecting + changes the color towards green, and selecting - changes it towards magenta. COLORS Adjusts the color intensity. SHARPNESS Adjusts the sharpness of the image. RGB INPUT RANGE (PC DVI-D/PC HDMI/PC D-SUB/PC RGB/AV DVI-D/AV HDMI) Sets the RGB input signal - Sharp PN-A601 | PN-A601 Professional LCD Monitor Operation Manual - Page 23
Menu Items USER Adjusts each item when the WHITE BALANCE is set to USER. R-CONTRAST.....Adjusts bright-toned red component. G-CONTRAST....Adjusts bright-toned green component. B-CONTRAST.....Adjusts bright-toned blue component. R-OFFSET..........Adjusts dark-toned red component. G-OFFSET.......... - Sharp PN-A601 | PN-A601 Professional LCD Monitor Operation Manual - Page 24
is turned on. The period can be set up to 60 seconds in units of one second. When this function is as OFF. When using an optional part, if instruction appears, change the setting accordingly. HDMI AUTO for reference. CONTROL KIT SETTING When the PN-ZR01 control kit (optional) is connected, - Sharp PN-A601 | PN-A601 Professional LCD Monitor Operation Manual - Page 25
AV video input terminal. (AUTO / PAL / PAL-60 / SECAM / NTSC3.58 / NTSC4.43) When output from the external speaker terminals. FIXED Disables this case select OFF. (Perform manual adjustment of the screen.) AUTO AV HDMI, AV COMPONENT and AV VIDEO When the PN-ZB01 (optional) is attached: PC DVI-D, PC - Sharp PN-A601 | PN-A601 Professional LCD Monitor Operation Manual - Page 26
screen in PbyP2 mode. AUTO OFF Sets the display method when no signals for the sub screen are input in PIP, PbyP, or PbyP2 mode. MANUAL....... Displays a main screen and a black sub screen. AUTO Displays the main screen as a full screen. TIPS • When WHITE BALANCE is set to THRU, BLACK LEVEL - Sharp PN-A601 | PN-A601 Professional LCD Monitor Operation Manual - Page 27
Menu Items nDual screen display You can display the screens of the PC input signal and AV input signal simultaneously. Set this function with "PIP MODES" in the PIP/PbyP menu. PIP Main screen A sub screen is displayed inside a main screen. Sub screen PbyP Main screen Sub screen A main screen - Sharp PN-A601 | PN-A601 Professional LCD Monitor Operation Manual - Page 28
PC D-SUB (2) (3) No. (1) POWER DAY OF THE WEEK (4) (5) TIME INPUT (6) BRIGHT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1920x1080 V: 60 Hz H: 67.5 kHz OK···[MENU] 1. Press or to select the SCHEDULE number, and - Sharp PN-A601 | PN-A601 Professional LCD Monitor Operation Manual - Page 29
In Windows XP, open [CD Drive] in [My Computer]. 3. Double-click [Adj_uty.exe]. The adjustment pattern will appear. Adjust the screen automatically or manually. 4. When adjustment is finished, press the [Esc] on the computer's keyboard to quit the adjustment program. 5. Eject the CD-ROM from the CD - Sharp PN-A601 | PN-A601 Professional LCD Monitor Operation Manual - Page 30
SELECT, ID No. SET, BAUD RATE, NETWORK, MAIL, SERVICE & SUPPORT, and SNMP (See page 24, and pages 48 to RS-232C (RS-232C/LAN when the PN-ZB01 (optional) is attached) Specifies whether this setting. When using an optional part, if instruction appears, change the setting accordingly. 3. Press - Sharp PN-A601 | PN-A601 Professional LCD Monitor Operation Manual - Page 31
numbers to each monitor (see page 33), you can make input mode selection/adjustment or can check the status of a specific monitor. Precautions when the PN-ZB01 (optional) is attached • To control the monitor via RS-232C, set RS-232C/LAN SELECT to RS-232C. • You cannot use RS-232C and - Sharp PN-A601 | PN-A601 Professional LCD Monitor Operation Manual - Page 32
Controlling the Monitor with a PC (RS-232C) nResponse code format When a command has been executed correctly O K Return code (0DH, 0AH) A response is returned after a command is executed. * If an ID number has been assigned Space (20H) Return code (0DH, 0AH) O K SPC 0 0 1 ID number of - Sharp PN-A601 | PN-A601 Professional LCD Monitor Operation Manual - Page 33
Controlling the Monitor with a PC (RS-232C) Advanced operation This section explains commands for daisy chain connection. The basic communication procedure is the same as in the "One-to-one connection with a PC" section. nCommands for ID control The command examples shown on this page assume the - Sharp PN-A601 | PN-A601 Professional LCD Monitor Operation Manual - Page 34
Controlling the Monitor with a PC (RS-232C) IDLK The parameter of this command sets the ID number of the monitor. The monitor is subject to all subsequent commands. Example: IDLK0002 ← Following commands are for the monitor with ID number: 2. WAIT ← Searching for monitor with ID number: 2 - Sharp PN-A601 | PN-A601 Professional LCD Monitor Operation Manual - Page 35
Controlling the Monitor with a PC (RS-232C) nRepeater control command Repeater control is achieved by setting the FOURTH CHARACTER of the parameter to "+". Example: VOLM030 + ← Sets volume of all monitors to 30. In repeater control, responses are returned by all the connected monitors. If you - Sharp PN-A601 | PN-A601 Professional LCD Monitor Operation Manual - Page 36
indicates a command which cannot be used in power standby mode regardless of the STANDBY MODE setting. *2: PN-ZB01 (optional) limitations (A) When PN-ZB01 (optional) is not attached, (B) When PN-ZB01 (optional) is attached. ○ : The command can be used. - : Error (ERR) Power control/Input mode - Sharp PN-A601 | PN-A601 Professional LCD Monitor Operation Manual - Page 37
Controlling the Monitor with a PC (RS-232C) SCREEN menu Auto CLOCK Function Command Direction ASNC W CLCK WR PHASE positioning size RESOLUTION RESET PHSE WR Position of HPOS WR the longest direction Position of VPOS WR the shortest direction Position of HSIZ WR the longest - Sharp PN-A601 | PN-A601 Professional LCD Monitor Operation Manual - Page 38
Function Auto ANALOG GAIN ANALOG OFFSET CONTRAST BLACK LEVEL TINT COLORS SHARPNESS RGB INPUT RANGE (AV HDMI) RGB INPUT RANGE (PC CMVY CMVG CMVC CMVB CMVM CRST W BMOD WR CTMP WR Parameter 1 0-127 0-127 0-60 0-60 0-60 0-60 0-24 0-2 0-2 1-2 1-2 1-2 1-2 0-2 0-2 0-1 0-1 -10-10 1 -10-10 - Sharp PN-A601 | PN-A601 Professional LCD Monitor Operation Manual - Page 39
-10-10 3 Reply -5-5 -5-5 -10-10 Control/Response contents *2 *1 (A) (B) ○○○ - Parameter Reply Control/Response contents 0-100 0-100 0-4 0-20 10-990 5-20 0-1 14 1 2 3 4 5 6 0 1-60 0-1 0-1 0-1 0-1 0-1 0-255 1-255 0 1-255 0 0 0-2 0-2 0-1 0-2 0-99 ID IDLK 0-100 0-100 0-4 0-20 10-990 5-20 0-1 14 - Sharp PN-A601 | PN-A601 Professional LCD Monitor Operation Manual - Page 40
(AV) COLOR SYSTEM AUDIO OUTPUT(RCA) AUDIO OUTPUT(RCA) When the PN-ZB01 (optional) is attached AUDIO LEVEL(STEREO MINI) SELF ADJUST AUTO , 1: ON ○ 0-1 0-1 0: OFF, 1: ON ○ 0-5 0-5 0: AUTO, 1: PAL, 2: PAL-60, 3: SECAM, 4: NTSC3.58, 5: NTSC4.43 ○○○ 0-1 0-1 0: VARIABLE, 1: FIXED ○○ - 0-2 - Sharp PN-A601 | PN-A601 Professional LCD Monitor Operation Manual - Page 41
Controlling the Monitor with a PC (RS-232C) MULTI menu Function ENLARGE ENLARGE MODE Command Direction ENLG WR EMAG WR EMHV WR Parameter 0-1 0-4 11-55 IMAGE POSITION (M x N) EPHV WR IMAGE POSITION (2 x 2) EPOS WR IMAGE POSITION (3 x 3) EPOS WR IMAGE POSITION (4 x 4) EPOS WR IMAGE - Sharp PN-A601 | PN-A601 Professional LCD Monitor Operation Manual - Page 42
) 6 PC RGB 7 AV DVI-D 8 AV S-VIDEO 9 AV HDMI 10 PC HDMI 1-2 1: MAIN, 2: SUB 0-1 0: POS1, 1: POS2 0-2 0: POS1, 1: POS2, 2: POS3 0-1 0: MANUAL, 1: AUTO Initialization/Functional Restriction Setting (FUNCTION) menu Function ALL RESET ADJUSTMENT LOCK ADJUSTMENT LOCK TARGET OSD DISPLAY LED TEMPERATURE - Sharp PN-A601 | PN-A601 Professional LCD Monitor Operation Manual - Page 43
Controlling the Monitor with a PC (RS-232C) Others Function SCREEN SIZE (PC) SCREEN SIZE (AV) VOLUME MUTE INFORMATION MODEL SERIAL NO BRIGHT TEMPERATURE SENSOR Command Direction WIDE WR WIDE WR VOLM WR MUTE WR INF1 R SRNO R VLMP WR DSTA R Parameter 1-5 1-5 0-31 0-1 0-31 - Sharp PN-A601 | PN-A601 Professional LCD Monitor Operation Manual - Page 44
PN-ZB01 (optional) is attached, your monitor can be connected to a LAN allowing you to control it from a PC on the LAN. You can also configure the monitor to send e-mail notification when it has a problem . TIPS • When the IP address is set manually, the IP addresses of the monitor connected to the - Sharp PN-A601 | PN-A601 Professional LCD Monitor Operation Manual - Page 45
Controlling the Monitor with a PC (LAN) ■ To set from a PC When the monitor is connected to a PC, LAN settings can be configured via PC. Set up process (1) Connect your monitor to a PC (2) Specify the PC's IP address (3) Configure the monitor's LAN settings (1) Connecting your monitor to a PC - Sharp PN-A601 | PN-A601 Professional LCD Monitor Operation Manual - Page 46
to obtain an address automatically, change this setting to "ON". To set the address manually, set this to "OFF". IP ADDRESS If the DHCP CLIENT is set to " or similar, click [Refresh]. TIPS • When the IP address is set manually, the IP addresses of the monitor connected to the RS-232C output terminal - Sharp PN-A601 | PN-A601 Professional LCD Monitor Operation Manual - Page 47
■ INFORMATION Information about this monitor appears. Controlling the Monitor with a PC (LAN) ■ ADJUSTMENT You can adjust these settings which are also available on the monitor's menu. • SCREEN (See page 22.) • PICTURE (See page 22.) • PICTURE (ADVANCED) (See page 29.) • AUDIO (See page 23.) • - Sharp PN-A601 | PN-A601 Professional LCD Monitor Operation Manual - Page 48
to obtain an address automatically, change this setting to "ON". To set the address manually, set this to "OFF". IP ADDRESS If the DHCP CLIENT is set to box empty and click [Apply]. TIPS • When the IP address is set manually, the IP addresses of the monitor connected to the RS-232C output terminal - Sharp PN-A601 | PN-A601 Professional LCD Monitor Operation Manual - Page 49
■ NETWORK (GENERAL) This screen allows you to specify the general LAN settings. Controlling the Monitor with a PC (LAN) ■ MAIL (ORIGINATOR) This screen allows you to configure the e-mail sent periodically or when the monitor has an error. The settings depend on the configuration of your LAN. Ask - Sharp PN-A601 | PN-A601 Professional LCD Monitor Operation Manual - Page 50
Controlling the Monitor with a PC (LAN) ■ MAIL (RECIPIENT) This screen allows you to specify the recipients of the e-mail sent periodically or when the monitor has an error. ■ MAIL (PERIODICAL) When PERIODICAL for CONDITION of MAIL (RECIPIENT) is checked, set the date and time to send the mail. - Sharp PN-A601 | PN-A601 Professional LCD Monitor Operation Manual - Page 51
SNMP is usable. (About 2 minutes) • Up to 16 alphanumeric letters and symbols can be used for the community name, user name and password. ■ SERVICE & SUPPORT (URL INFORMATION) You can display a specific URL in the URL INFORMATION field on the INFORMATION screen when an error occurs in the monitor - Sharp PN-A601 | PN-A601 Professional LCD Monitor Operation Manual - Page 52
problem with your display, before calling for service, please review the following troubleshooting Is the PN-ZR01 (optional) remote control sensor box disconnected? Sound from left and right speakers is Hardware has a problem. Turn off the monitor and request repair from your SHARP dealer. (When - Sharp PN-A601 | PN-A601 Professional LCD Monitor Operation Manual - Page 53
the brightness of the backlight decreases automatically in order to prevent high-temperaturerelated problems. When this occurs, "TEMPERATURE" is displayed on the screen and the Power or around the vents. Remove dust if possible. Ask SHARP dealer about removing internal dust. Troubleshooting 53 E - Sharp PN-A601 | PN-A601 Professional LCD Monitor Operation Manual - Page 54
Specifications nPN-A601 Product Specifications Model PN-A601 LCD component 60" Class [60 inch (152.5cm) diagonal] TFT LCD Max. resolution (pixels) not support plug and play. *3 Temperature condition may change when using the display together with the optional equipments recommended by SHARP. - Sharp PN-A601 | PN-A601 Professional LCD Monitor Operation Manual - Page 55
bracket that complies with the VESA-compatible mounting method. SHARP recommends using M6 screws and tighten the screws. Note your video card and computer must support the same standard in order for No Vsync Yes Yes No No *1 When PN-ZR01 (optional) and PN-ZB01 (optional) are not connected. *2 - Sharp PN-A601 | PN-A601 Professional LCD Monitor Operation Manual - Page 56
65.0MHz Yes Yes Yes 56.5kHz 70Hz 75.0MHz Yes Yes Yes 60.0kHz 75Hz 78.75MHz Yes Yes Yes 1152 × 864 67.5kHz 75Hz the image will be cut down to panel size then displayed. *2 Available when the PN-ZB01 (optional) is attached. * All are compliant only with non-interlaced. * Depending - Sharp PN-A601 | PN-A601 Professional LCD Monitor Operation Manual - Page 57
59.94Hz 60Hz 50Hz 59.94Hz 60Hz 50Hz 59.94Hz 60Hz 50Hz 59.94Hz 60Hz 59.94Hz 60Hz 50Hz 59.94Hz 60Hz *1 Available when the PN-ZB01 (optional) is attached. DVI-D*1 - Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes - Specifications HDMI Yes Yes Yes Yes - Sharp PN-A601 | PN-A601 Professional LCD Monitor Operation Manual - Page 58
Specifications nPC/AV DVI-D input terminal pins (DVI-D 24 pin) nPC/AV HDMI input terminal pins (HDMITM Connector) No. Function 1 TMDS data 2- 2 TMDS data 2+ 3 TMDS data 2/4 shield 4 N.C. 5 N.C. 6 DDC clock 7 DDC data 8 N.C. 9 TMDS data 1- 10 TMDS data 1+ 11 TMDS data 1/3 shield 12 - Sharp PN-A601 | PN-A601 Professional LCD Monitor Operation Manual - Page 59
Mounting Precautions (For SHARP dealers and service engineers) • When installing, removing or moving the monitor, hold it with the handles both on the rear and the unit bottom. Do not hold the LCD panel. This may cause product damage, failure, or injury. • After mounting, please carefully ensure - Sharp PN-A601 | PN-A601 Professional LCD Monitor Operation Manual - Page 60
PN-A601 Mu EN11J(1)
PN-A601
LCD MONITOR
OPERATION MANUAL