Sharp PN-A601 PN-A601 Professional LCD Monitor Operation Manual - Page 34
Controlling the Monitor with a PC RS-232C, Repeater control, PC D-SUB.
View all Sharp PN-A601 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Controlling the Monitor with a PC (RS-232C) IDLK The parameter of this command sets the ID number of the monitor. The monitor is subject to all subsequent commands. Example: IDLK0002 ← Following commands are for the monitor with ID number: 2. WAIT ← Searching for monitor with ID number: 2 OK 002 ← Found monitor with ID number: 2 VOLM0030 ← Sets volume of monitor with ID number: 2 to 30.* WAIT ← Processing OK 002 VOLM0020 ← Sets volume of monitor with ID number: 2 to 20.* WAIT OK 002 IDLK0000 ← Canceling fixed ID number setting WAIT ← Canceling IDLK OK 002 ← Cancelation complete VOLM0010 The volume of the monitor with ID number: OK 001 ← 1 (the one directly connected to the PC) is set to 10. (IDLK is canceled.) * The IDLK command remains effective until it is canceled, or power is shut off. nRepeater control This system has a function to allow setting of multiple monitors connected in a daisy chain using a single command. This function is called repeater control. You can use Repeater control function without assigning ID numbers. [Example] Set 1 Set 2 Set 3 Set 4 * If monitors are connected as shown above, you can execute a command like "Set all monitors' input settings to PC D-SUB". IDCK Provides screen display of the ID number currently assigned to a monitor, and the ID number currently set for IDLK (if any). Example: (After executing IDLK0002) IDCK0000 ← (Parameter has no meaning.) Returned response. The ID ID : 001 IDLK : 002 ← number is also displayed on the monitor screen. IDCK000 + ← Repeater control. (If a command is used with repeater control, ID WAIT designation using IDSL or IDLK ID : 001 IDLK : 000 is canceled.) ID : 002 IDLK : 000 ID : 003 IDLK : 000 ID : 004 IDLK : 000 E 34