Sharp PN-A601 PN-A601 Professional LCD Monitor Operation Manual - Page 54
Specifications
View all Sharp PN-A601 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Specifications nPN-A601 Product Specifications Model PN-A601 LCD component 60" Class [60 inch (152.5cm) diagonal] TFT LCD Max. resolution (pixels) 1920 x 1080 Max. colors Approx. 1.06 billion colors Pixel pitch 0.692 mm (H) × 0.692 mm (V) Viewing angle 176° right/left/up/down (contrast ratio ≥ 10) Screen active area inch (mm) 52-5/16 x 29-7/16 (1329.1 x 747.6) Computer input signal Digital (DVI 1.0 standard-compliant), Analog RGB (0.7 Vp-p) [75 Ω] Sync signal Horizontal/vertical separate (TTL: positive/negative), Sync-on-green, Composite sync (TTL: positive/negative) Video color system NTSC (3.58MHz)/NTSC (4.43MHz)/PAL/PAL-60/SECAM Plug and play VESA DDC2B Power management VESA DPMS, DVI DMPM Input terminals PC/AV Digital HDMI x 1 PC Analog Mini D-sub 15 pin, 3 rows x 1 Audio 3.5 mm mini stereo jack x 1 Serial (RS-232C) D-sub 9 pin x 1 When PN-ZB01 PC/AV (optional) is PC attached AV Digital DVI-D 24 pin (HDCP compatible) x 1 Analog BNC *1*2 x 1 Composite video BNC x 1 S-video x 1 Component BNC (Y, Cb/Pb, Cr/Pr) *1 x 1 Audio RCA pin (L/R) x 2 Output terminals Audio RCA pin (L/R) x 1 Serial (RS-232C) D-sub 9 pin x 1 When PN-ZB01 PC/AV Digital (optional) is External speaker attached DVI-D 24 pin x 1 10 W + 10 W [6 Ω] LAN terminal [When PN-ZB01 (optional) is attached] 10 BASE-T/100 BASE-TX Power requirement AC 100 V - 240 V, 50/60 Hz Operating temperature *3 32°F to 104°F (0°C to 40°C) Operating humidity 20% to 80% (no condensation) Power consumption 600 W / 1.0 W / 1.0 W (maximum / input signal waiting mode *4 / standby mode *5) Power consumption [PN-ZB01 (optional)] 620 W Dimensions (excluding protrusions) inch (mm) Approx. 54-1/8 (W) x 5-13/16 (D) x 31-1/4 (H) (1,374 x 147 x 793) Weight Weight [PN-ZB01 (optional)] lbs. (kg) Approx. 99.2 (45) lbs. (kg) Approx. 1.102 (0.5) *1 Cannot be used simultaneously. *2 Does not support plug and play. *3 Temperature condition may change when using the display together with the optional equipments recommended by SHARP. In such cases, please check the temperature condition specified by the optional equipments. *4 When AUTO INPUT CHANGE is set to OFF. *5 When STANDBY MODE is set to STANDARD. When STANDBY MODE is set to LOW POWER: 0.5 W. As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. nPN-ZR01 (optional) Product Specifications Model Remote control sensor box dimensions Remote control sensor box weight PN-ZR01 inch (mm) Approx. 1-3/8 (W) x 7/8 (D) x 5-1/8 (H) (34.2 x 23 x 130) lbs. (kg) Approx. 0.220 (0.1) E 54