Sharp PN-A601 PN-A601 Professional LCD Monitor Operation Manual - Page 28
Zoom2 Special Setting, Schedule, Menu Items, Press, Set The Schedule., Power, Day Of The Week, Input
View all Sharp PN-A601 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Menu Items nZOOM2 SPECIAL SETTING If you connect a laptop computer with any of the following screen resolutions and black bands appear around the screen, set ZOOM2 SPECIAL SETTING of INPUT SIGNAL on the OPTION menu to ON and then select ZOOM2 in the SIZE setting. This displays the area inside the black band. Laptop computer Corresponding signal*1 resolution 1280x800 1280x1024, 1280x960, 1400x1050*2 1280x600 1280x720 1024x600 1024x768 *1: T his setting is effective only when the screen resolution, including the black band, is one of the resolutions listed above. *2: Use the automatic screen adjustment. nSCHEDULE You can set the time to switch the monitor on and off. Set this function with "SCHEDULE" in the OPTION menu. (See page 25.) When BRIGHT is set, set BRIGHTNESS SENSOR to OFF on the SETUP menu. SCHEDULE PC D-SUB (2) (3) No. (1) POWER DAY OF THE WEEK (4) (5) TIME INPUT (6) BRIGHT - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1920x1080 V: 60 Hz H: 67.5 kHz OK···[MENU] 1. Press or to select the SCHEDULE number, and press . 2. Set the SCHEDULE. (See the description below.) Press or to select items, and press or to change the setting. 3. Press . MENU SCHEDULE becomes effective. (1) ●: SCHEDULE effective -: SCHEDULE not effective (2) POWER ON : Switches the monitor on at the specified time. OFF : Switches the monitor off at the specified time and puts the monitor in standby mode. (3) DAY OF THE WEEK Specifies the day of the week to execute the SCHEDULE. 0: ONLY ONCE Executes the SCHEDULE once on the specified day. Specify the day of the week to execute the SCHEDULE. 1: EVERY WEEK Executes the SCHEDULE on the specified day of the week every week. Specify the day of the week to execute the SCHEDULE. Periodic setting such as "Monday through Friday" is also possible. 2: EVERY DAY Executes the SCHEDULE every day regardless of the day of the week. (4) TIME Specifies the time to execute the SCHEDULE. Set the time on a 12-hour basis. (Factory default) Can be entered as 24-hour time using the TIME setting in DATE/TIME FORMAT. (5) INPUT Specifies the input mode at power-on. When not specifying, the screen at the previous power-off appears. Input modes displayed on DVI, HDMI, BNC and D-SUB depend on INPUT SELECT settings. (6) BRIGHT Sets the brightness when changing the screen brightness at a specified time. Caution • Do not switch off the main power after setting the SCHEDULE. • Specify the correct date and time. (See page 25.) SCHEDULE does not function unless the date and time are specified. • Check regularly that the set date and time are correct. • When STANDBY MODE is LOW POWER, SCHEDULE cannot be set. • When a temperature abnormality occurs and the backlight brightness is reduced, the brightness is not changed even if a schedule set to BRIGHT is executed. TIPS • Up to 8 SCHEDULE items can be registered. • Setting the SCHEDULE flashes the power LED alternately in red and orange in standby mode. • A SCHEDULE that has a large number has precedence over that of a small number when schedules overlap. • If D-SUB of INPUT SELECT on the OPTION menu is set to AV VIDEO, the input mode will switch to AV VIDEO (D-SUB) regardless if set to D-SUB or VIDEO. E 28