Sharp PN-A601 PN-A601 Professional LCD Monitor Operation Manual - Page 25

Menu Items nOPTION DATE/TIME SETTING Set the date and time. Press or to select the date and time, and press or to change the numerical values. Set the date in "Month/Day/Year" order. Set the time on a 12-hour basis. (Factory default) DATE/TIME FORMAT Sets the date/time display format. DATE MM/DD/YYYY DD/MM/YYYY YYYY/MM/DD (YYYY: Year, MM: Month, DD: Day) TIME Select 12- or 24-hour time. SCHEDULE (See page 28.) You can turn the power on/off and change the screen brightness at a specified time. INPUT SELECT Select the input mode to be used in PC D-Sub input terminal, PC/AV DVI-D input terminal, PC/AV HDMI input terminal and PC RGB/AV component input terminals. For D-SUB, select SET after selecting the input mode, and then press MENU . D-SUB and BNC cannot be set to AV COMPONENT at the same time. If D-SUB is set to AV VIDEO, the AV VIDEO input terminal cannot be used for BNC. AUDIO SELECT Selects the terminal used to input audio signals in each input mode. INPUT SIGNAL (PC D-SUB/PC RGB) If a computer connected to the PC D-sub/PC RGB input terminal outputs any of the following resolutions, make a selection from the following options. 480 LINES...........AUTO, 640x480 or 848x480 768 LINES...........AUTO, 1024x768, 1280x768 or 1360x768 1050 LINES.........1400x1050 or 1680x1050 ZOOM2 SPECIAL SETTING (See page 28.) SCAN MODE (AV input) Sets the scan mode used for AV mode input. MODE1 Over-scan display MODE2 Under-scan display MODE3 Under-scan display when the input signal is 1080i/p. Otherwise, over-scan display * Even when MODE1 is selected, under-scan display is used when the input signal is 1080i/p and the screen size is Dot by Dot. POWER MANAGEMENT POWER MANAGEMENT determines whether or not to switch modes from no signal to the input signal standby mode. COLOR SYSTEM (AV S-VIDEO/AV VIDEO) Select the color system of the AV equipment which is connected to AV S-video and AV video input terminal. (AUTO / PAL / PAL-60 / SECAM / NTSC3.58 / NTSC4.43) When AUTO is selected, the color system is automatically set according to the input signal. AUDIO OUTPUT(RCA) Sets the volume of sound output from the audio output terminals. When set to VARIABLE2, audio is not output from the external speaker terminals. VARIABLE...........You can adjust the volume using VOLUME. FIXED Disables volume adjustment and fixes the sounds. When the PN-ZB01 (optional) is attached: VARIABLE1.........You can adjust the volume using VOLUME. VARIABLE2.........You can adjust the volume using VOLUME, but audio is not output from the external speaker terminals. FIXED Disables volume adjustment and fixes the sounds. AUDIO LEVEL(STEREO MINI) Selects the maximum audio input level of the audio input terminal. SELF ADJUST On a PC D-SUB/PC RGB screen, specify whether to perform screen adjustment automatically or not. When ON is selected, the screen is automatically adjusted when its resolution is 800 x 600 or higher and the timing of input signals changes. "ADJUSTING" appears on the screen during the adjustment. For images with black edges, etc., depending on the signal, adjustment may not be possible. In this case select OFF. (Perform manual adjustment of the screen.) AUTO INPUT CHANGE Specify whether to change inputs automatically. When ON is selected and no signal is present in the selected input mode, AUTO INPUT CHANGE automatically changes the selected mode to another mode where a video signal is present. When video signals exist in multiple input modes, the switching priority is as follows: PC D-SUB, PC HDMI, AV HDMI, AV COMPONENT and AV VIDEO When the PN-ZB01 (optional) is attached: PC DVI-D, PC HDMI, PC D-SUB, PC RGB, AV DVI-D, AV HDMI, AV COMPONENT, AV S-VIDEO and AV VIDEO (Input mode switching may take 15 seconds or more, depending on the connected equipment. Input signals may not be detected properly and a priority may change, depending on the connected equipment or video signals.) FAN SPEED Sets the rotation speed of the fan. As this number increases, the rotation speed becomes faster. When set to AUTO, the rotation speed of the fan will change depending on the internal temperature. 25 E