Sharp PN-A601 PN-A601 Professional LCD Monitor Operation Manual - Page 27

Menu Items nDual screen display You can display the screens of the PC input signal and AV input signal simultaneously. Set this function with "PIP MODES" in the PIP/PbyP menu. PIP Main screen A sub screen is displayed inside a main screen. Sub screen PbyP Main screen Sub screen A main screen and a sub screen are displayed in a line. nEnlarge • You can align several monitors and integrate them into a single large screen to display. • Up to five monitors can be aligned in both the horizontal and vertical directions. • Each monitor displays enlarged views of separated images. (Example) Horizontal direction: 2 monitors Vertical direction: 2 monitors PbyP2 Main screen Sub screen Displays a main screen which measures 1280 pixels in the longest direction and a sub screen in a line. * The currently selected input signal is displayed on the main screen. * You cannot simultaneously display the screens of signals of the same type, such as two types of PC input signals or two types of AV input signals. * The dual screen display cannot be used with the combination of PC DVI-D and AV HDMI or of AV DVI-D and PC HDMI. TIPS • You might infringe on a copyright of the author which is protected by copyright law when you display the images of the computer screen and television/VCR simultaneously for profit-making or to show the image to the public. • The screen size for dual-screen display is the same as the screen size for single-screen display. The Dot by Dot screen is displayed in NORMAL size except when it is set as the PIP main screen. • When dual-screen display is selected, the SCREEN MOTION function is disabled. • When dual-screen display is selected, the AUTO INPUT CHANGE function is disabled. • When dual-screen display is selected, the screen cannot be enlarged. • When dual-screen display is selected, the INPUT SELECT options cannot be set. • When an interlaced signal (1080i, 480i, video, S-Video) is input to the sub screen, horizontal lines may flicker. If this happens, display the image on the main screen. Horizontal direction: 3 monitors Vertical direction: 2 monitors Setting procedure Set using the MULTI menu. 1. Set ENLARGE to ON. 2. Select ADVANCED (ENLARGE). 3. Set the number of monitors aligned in the horizontal direction in ENLARGE H. 4. Set the number of monitors aligned in the vertical direction in ENLARGE V. 5. Set the section of the separated image to be displayed on each monitor in ENLARGE-POS. 1) Press . 2) P ress , , or to select position, then press MENU . TIPS • When Enlarge is used, the SCREEN MOTION function is disabled. • When Enlarge is used, the AUTO INPUT CHANGE function is disabled. • When Enlarge is used, the HDMI AUTO VIEW function is disabled. 27 E