Singer 14T968DC PROFESIONAL 5 Instruction Manual 31 - Page 19

Lower Looper

Get Singer 14T968DC PROFESIONAL 5 PDF manuals and user guides View all Singer 14T968DC PROFESIONAL 5 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

Thread the looper area of the machine following the green color coded thread guides (4~9). Thread the hole in the upper looper from front to back 9. Note: Make sure thread passes behind lower looper. Note: Use tweezers provided in the accessory case to aid in threading the looper. Pull about 10cm(4 inches) of thread through the looper and place to the back of the needle plate. 2) Threading the Lower Looper (Red) Thread the lower looper as indicated 1~10. Raise Presser foot by lowering presser bar lifter to release Tension discs. 8 4 9 9 5 8 7 6 1 2 3 4 10 5 9 8 7 6 Pass thread from back to the front through the thread guide 1. 1 Thread the top cover thread guide by pulling 2 the thread towards the left until it slips under guide. Then pull thread along the right side of 2 button as illustrated. 18

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
Raise Presser foot by lowering presser bar lifter to
release Tension discs.
18
Thread the top cover
thread guide by pulling
the thread towards the
left until it slips under
guide. Then pull thread
along the right side of
button as illustrated.
Thread the lower looper as indicated 1~10.
Thread the looper area of the machine following the
green color coded thread guides (4~9).
Thread the hole in the upper looper from front to
back 9. Note: Make sure thread passes behind lower
looper.
Note: Use tweezers provided in the accessory
case to aid in threading the looper.
Pull about 10cm(4 inches) of thread through the
looper and place to the back of the needle plate.
Pass thread from back to the front through the
thread guide 1.
2) Threading the
(Red)
Lower Looper
2
2
5
9
8
9
4
8
9
10
1
6
7
8
5
7
6
4
3
2
1