Singer 14T968DC PROFESIONAL 5 Instruction Manual 31 - Page 55
How To Sew A Rolled Hem
View all Singer 14T968DC PROFESIONAL 5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
24. HOW TO SEW A ROLLED HEM This machine can sew four types of rolled hems. Rolled hemming is done by rolling and overedging the fabric edge. Light weight fabrics such as lawn, voile, organdy, crepe, etc. perform the best. Rolled hemming is not suited for heavy or stiff fabrics. NOTE: Rolled hemming can only be performed with the overedge right needle. Machine Set up Caution: Be sure to turn off power switch. Remove the overedge left needle, chain stitch needle and cover stitch needle(s). Move seam width finger knob to setting R. Align left face of seam width finger support plate with R mark on needle plate by turning seam width adjustment knob, as required. Set stitch length dial to "1~2" and a fine seam will be sewn. Needle: Singer Cat. No. 2022 #14/90 or 2022 #11/80 Thread: A variety of thread combinations can be used for rolled hemming. 54 R N 2 1