Sony BVMF250A User Manual (Operating Instructions - BVM-F250A / BVM-F170A) - Page 103
Upgrading the Monitor, When a version earlier than 1.2 of the, software for the controller is upgraded
View all Sony BVMF250A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Chapter 4 Operations Upgrading the Monitor 1 Insert the "Memory Stick PRO" into the Memory Stick insertion slot of the controller. 2 Select the Monitor Upgrade (page 77) menu in the System Configuration menu. 3 Enter the 4-digit password. The Monitor Upgrade screen is displayed, and the current version is indicated. For the password, see Password (page 75) of the System Configuration menu. 4 Select the item to upgrade from among Software Upgrade, Kernel Upgrade, FPGA Upgrade, and DisplayPort Upgrade. After about 10 seconds, the old and new software versions, kernel version or DisplayPort version, and the message to confirm that you wish to execute the upgrade are displayed. When FPGA Upgrade is selected, the old and new versions of FPGA1, FPGA2, FPGA CORE, starting from the left, and a confirmation message are displayed. Display example Monitor software will be upgraded and monitor will restart. Are you sure? 5 Confirm the data version and press the ENTER (Ent) button. Upgrading starts. The "In progress x" is displayed and "x" flashes during upgrading. The "x" indication may stop flashing during upgrading, but the data are being upgraded correctly. Upgrading takes about 8 minutes for the software program, about 2 minutes for the kernel, about 3 minutes for FPGA data, and about 2 minutes for DisplayPort data. Notes • Do not remove the "Memory Stick PRO" from the Memory Stick insertion slot during upgrading or disconnect the LAN cable between the monitor and controller. • Do not turn off the power of the monitor and controller during upgrading. After completion of upgrading, the display on the screen disappears, and the system is restarted. After restarting, the previous screen is displayed. 6 Select the Monitor Upgrade menu in the System Configuration menu and confirm that the version of the selected item has been upgraded. When the upgrade sequence does not move forward correctly, the message such as "Procedure failure" is displayed in red. If this error message is displayed, contact your Sony representative. Upgrading the Controller 1 Insert the "Memory Stick PRO" into the Memory Stick insertion slot of the controller. 2 Select the Controller Upgrade (page 86) menu in the Controller menu. 3 Enter the 4-digit password. The Controller Upgrade screen is displayed, and the current version is indicated. For the password, see Password (page 75) of the System Configuration menu. 4 Select the item to upgrade from Software Upgrade or Kernel Upgrade. After about 10 seconds, the old and new software versions or kernel version, and the message to confirm that you wish to execute the upgrade are displayed. Display example Controller software will be upgraded and controller will restart. Are you sure? 5 Confirm the data version and press the ENTER (Ent) button. Upgrading starts. When a version earlier than 1.2 of the software for the controller is upgraded When upgrading starts, the dot (indicator) lights as moving from left to right in the display window of the controller. The dot may stop during upgrading, but the data are being upgraded correctly. 103 Upgrading the Monitor and Controller