Sony BVMF250A User Manual (Operating Instructions - BVM-F250A / BVM-F170A) - Page 106

Appendixes HDMI HDMI (×1) HDCP correspondence, Deep Color correspondence Signal format See "HDMI/DisplayPort" (page 118) of "Available Signal Formats". DisplayPort DisplayPort connector (×1) HDCP correspondence, 18/24/30bpp (bits per pixel) correspondence Signal format See "HDMI/DisplayPort" (page 118) of "Available Signal Formats". Option port Four (4) ports Signal format See "Available Signal Systems" (page 112) and "Available Signal Formats" (page 113). Parallel remote D-sub 9-pin (female) (×1) Serial remote (LAN) Ethernet (10BASE-T/100BASE-TX), RJ-45 (×1) Output SDI DC 5V OUT BNC (×1) (monitor output) Output signal amplitude: 800 mVp-p±10% Output impedance: 75 ohms unbalanced Transmission distance 3G-SDI: 70 m max.3) HD-SDI: 100 m max.3) SD-SDI: 200 m max.4) Note The signal from the monitor output connector does not satisfy the ON-LINE signal specifications. 3) When using the 5C-FB coaxial cable made by Fujikura Ltd. or equivalent 4) When using the 5C-2V coaxial cable made by Fujikura Ltd. or equivalent Circle 4-pin (female) (×1) General Power requirements 100 V to 240 V AC, 1.6 A to 0.8 A, 50/60 Hz Power consumption Approx. 145 W (max.) Approx. 72 W (average power consumption in the default status) Inrush current (1) Maximum possible inrush current at initial switch-on (Voltage changes caused by manual switching): 53 A peak, 17 A r.m.s. (240V AC) (2) Inrush current after a mains interruption of five seconds (Voltage changes caused at zero-crossing): 39 A peak, 6 A r.m.s. (240V AC) Operating temperature 0 °C to 35 °C (32 °F to 95 °F) Recommended: 20 °C to 30 °C (68 °F to 86 °F) Operating humidity 0% to 90% (no condensation) Storage/transport temperature -20 °C to +60 °C (-4 °F to +140 °F) Storage/transport humidity 0% to 90% Operating/storage/transport pressure 700 hPa to 1060 hPa Mass Approx. 13.0 kg (28 lb 11 oz) Supplied accessories AC power cord (1) AC plug holder (1) Operation Guide (Japanese/English) (1) CD-ROM (1) Optional accessories BKM-16R Monitor Control Unit BKM-37H/BKM-38H Controller Attachment Stand SMF-700 Monitor Interface Cable BKM-220D SDI 4:2:2 Input Adaptor (with serial number 2100001 or higher) BKM-227W NTSC/PAL Input Adaptor (with serial number 2100001 or higher) BKM-229X Analog Component Input Adaptor (with serial number 2200001 or higher) BKM-243HS HD/D1-SDI Input Adaptor (with serial number 2108355 or higher) BKM-244CC HD/SD-SDI Closed Caption Adaptor BKM-250TG 3G/HD/SD-SDI Input Adaptor (with serial number 7300001 or higher) Note An input adaptor with a specified serial number may be required for your intended use. For the serial numbers of the input adaptors available for this unit, see "Input Adaptors" (page 22). \Design and specifications are subject to change without notice. 106 Specifications (BVM-F250A)