Sony BVMF250A User Manual (Operating Instructions - BVM-F250A / BVM-F170A) - Page 35
Setting for the LAN to Connect the Multiple Units, Cancel, Confirm, Monitor, Controller
View all Sony BVMF250A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Chapter 2 Preparations 3 Confirm the settings. Select Area XXXXXXXXXX Color Temp: xx Setup Level: xx Component Level: xx Color Profile: xx BVM-F250A NETWORK switch t Set to PEER TO PEER. Cancel Confirm Cancel: Select to cancel the setting and return to the Select Area screen. Confirm: Select to save the setting and end selecting the area. See "Default value for each area" on page 33 on the setting value. After saving and reflecting the setting, you can change the setting with the menu. • Color Temp (color temperature) (page 58) • Setup Level (NTSC Setup Level: page 60, Betacam Setup Level: page 60) • Component Level (page 60) • Color Profile (page 58) Setting for the LAN to Connect the Multiple Units Controller (BKM-16R) NETWORK switch tSet to PEER TO PEER. BVM-F170A NETWORK switch t Set to PEER TO PEER. You can control the multiple monitors using the controller (BKM-16R, optional) connected via each LAN (10/100) connector. You can also control a specific monitor or monitor group. Set an IP address to the monitors and the controller and a monitor ID number and group ID number to each monitor. 1 Set the NETWORK switches of each monitor and the controller to PEER TO PEER. Controller (BKM-16R) NETWORK switch tSet to PEER TO PEER. 2 Set the different IP address to each monitor and the controller. Monitor: Set the IP address in the Network Setting menu (page 72) of the System Configuration menu. Controller: Set the IP address in the Network Setting menu (page 82) of the Controller menu. 3 Set Monitor ID and Group ID in the Network menu (page 72) of the System Configuration menu. Set the different monitor ID number to each monitor and if necessary, group ID number. You can use the numbers 1 to 99 as a monitor ID number or group ID number. 4 Set the NETWORK switches of the monitor and the controller to LAN. 35 Settings