Sony BVMF250A User Manual (Operating Instructions - BVM-F250A / BVM-F170A) - Page 58

Color Profile, Color Space, Gamma, ITU-R BT.601 - bvm f250

Get Sony BVMF250A PDF manuals and user guides View all Sony BVMF250A manuals
Add to My Manuals
Save this manual to your list of manuals

Page 58 highlights

Chapter 3 Menu Menu Color Temp Picture Preset Matrix HD SD HDMI/DisplayPort Auto Color Profile Color Profile (BVM-F250A) Function and operation ([ ]: factory setting) Sets the color temperature. You can select from D93, D65, User1 to User5. When D93 or D65 data is changed, they are displayed as D93* or D65*. Note on color temperature adjustment If you measure the color temperatures of different display types, such as CRT, LCD, or OLED, by using a common (or general) color analyzer that is based on CIE 1931, and adjust the xy chromaticity to the same value, the appearance may be different because of optical spectrum differences. To compensate for this difference, the D93, D65 and User1 to User5 settings of the monitor are adjusted by an offset*. * The offset value applied (x-0.006, y-0.011) is based on the Judd's function to the CIE 1931 (x, y) value. Sets the picture adjustment preset. Select from Preset1 to Preset5. Sets Matrix data (transmission matrix) depending on the input signal format. Three transmission matrix data are preset. Matrix data ITU-R BT.709: Select when the signal of the ITU-R BT.709 standards format is input. ITU-R BT.601: Select when the signal of the ITU-R BT.601 standards format is input. SMPTE 240M: Select when the signal of the SMPTE 240M standards format is input. The Matrix data can be selected for the HD or SD input signal, respectively. For the type of the input signal, see "Available Signal Formats" (page 113). Sets Matrix of the HD signal. You can select from [ITU-R BT.709], ITU-R BT.601 or SMPTE 240M. Sets Matrix of the SD signal. You can select from ITU-R BT.709, [ITU-R BT.601], SMPTE 240M. Sets the manual or automatic setting for the transmission matrix of the HDMI or DisplayPort signal. Off: Select to use Matrix set in the HD or SD menu. [On]: Select to set Matrix automatically according to the input signal. As the monitor is equipped with a wider color space OLED panel, the signal can be displayed with the color space and gamma selected in the Color Profile menu. Sets the color profile (color space and gamma) to be used. There are four Color Profile data items in which the color space and gamma have been preset and user channel data item in which Color Space (color space) and Gamma (gamma) can be selected for each individual channel. Preset data: BVM SMPTE-C, BVM EBU, ITU-R BT.709, F250 Native Selectable data: User CHXX (the currently selected channel number is displayed) Color Profile BVM SMPTE-C BVM EBU ITU-R BT.709 F250 Native User CHXX Color Space SMPTE-C EBU ITU-R BT.709 F250 Native Select above four types in Color Space menu (page 59) Gamma CRT BVM CRT BVM 2.4 2.2 Select above three types in Gamma menu (page 60) 58 Channel Configuration Menu

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
58
Channel Configuration Menu
Chapter 3
Menu
Color Temp
Sets the color temperature.
You can select from
D93
,
D65
,
User1
to
User5
.
When D93 or D65 data is changed, they are displayed as D93* or D65*.
Note on color temperature adjustment
If you measure the color temperatures of different display types, such as CRT, LCD, or OLED,
by using a common (or general) color analyzer that is based on CIE 1931, and adjust the xy
chromaticity to the same value, the appearance may be different because of optical spectrum
differences.
To compensate for this difference, the D93, D65 and User1 to User5 settings of the monitor
are adjusted by an offset*.
* The offset value applied (x-0.006, y-0.011) is based on the Judd’s function to the CIE 1931 (x, y) value.
Picture Preset
Sets the picture adjustment preset.
Select from
Preset1
to
Preset5
.
Matrix
Sets Matrix data (transmission matrix) depending on the input signal format.
Three transmission matrix data are preset.
Matrix data
ITU-R BT.709:
Select when the signal of the ITU-R BT.709 standards format is input.
ITU-R BT.601:
Select when the signal of the ITU-R BT.601 standards format is input.
SMPTE 240M:
Select when the signal of the SMPTE 240M standards format is input.
The Matrix data can be selected for the HD or SD input signal, respectively.
For the type of the input signal, see “Available Signal Formats” (page 113).
HD
Sets Matrix of the HD signal.
You can select from
[ITU-R BT.709]
,
ITU-R BT.601
or
SMPTE 240M
.
SD
Sets Matrix of the SD signal.
You can select from
ITU-R BT.709
,
[ITU-R BT.601]
,
SMPTE 240M
.
HDMI/DisplayPort Auto
Sets the manual or automatic setting for the transmission matrix of the HDMI or DisplayPort
signal.
Off:
Select to use Matrix set in the HD or SD menu.
[On]:
Select to set Matrix automatically according to the input signal.
Color Profile
As the monitor is equipped with a wider color space OLED panel, the signal can be displayed
with the color space and gamma selected in the Color Profile menu.
Color Profile (BVM-F250A)
Sets the color profile (color space and gamma) to be used.
There are four Color Profile data items in which the color space and gamma have been
preset and user channel data item in which Color Space (color space) and Gamma (gamma)
can be selected for each individual channel.
Preset data: BVM SMPTE-C, BVM EBU, ITU-R BT.709, F250 Native
Selectable data: User CHXX (the currently selected channel number is displayed)
Menu
Function and operation ([
]: factory setting)
Color Profile
Color Space
Gamma
BVM SMPTE-C
SMPTE-C
CRT BVM
BVM EBU
EBU
CRT BVM
ITU-R BT.709
ITU-R BT.709
2.4
F250 Native
F250 Native
2.2
User CHXX
Select above four
types in Color Space
menu (page 59)
Select above three types
in Gamma menu (page
60)