Sony BVMF250A User Manual (Operating Instructions - BVM-F250A / BVM-F170A) - Page 34
Latin America is selected, Asia Except Japan is selected
View all Sony BVMF250A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Chapter 2 Preparations To compensate for this difference, the D93, D65 and User1 to User5 settings of the monitor are adjusted by an offset*. * The offset value applied (x-0.006, y-0.011) is based on the Judd's function to the CIE 1931 (x, y) value. If 2 Latin America is selected: Select Area Latin America PAL & PAL-N Area B NTSC & PAL-M Area B PAL&PAL-N area NTSC&PAL-M area ENTER button UP/DOWN buttons Ent button 1 Turn on the monitor with the MAIN POWER switch. The Select Area screen appears. Select Area North America B Latin America B Africa B Australasia B Europe B Middle-East B Asia Except Japan B Japan B 1 North America 2 Latin America 3 Africa Australia/New Zealand Europe/Russia Middle East 4 Asia Except Japan 5 Japan 2 Press the UP or DOWN button of the controller to select the area where you intend to use the monitor and press the ENTER (Ent) button. If you select either Latin America or Asia Except Japan, one of the following screens appears. Select PAL & PAL-N or NTSC & PAL-M and press the ENTER (Ent) button. If 4 Asia Except Japan is selected: Select Area Asia Except Japan NTSC Area B PAL Area B NTSC area PAL area Customers who will use this monitor in the shaded areas shown in the map below should select NTSC Area. Other customers should select PAL Area. Then press the ENTER (Ent) button. 34 Settings