Sony BVMF250A User Manual (Operating Instructions - BVM-F250A / BVM-F170A) - Page 70
When Peak Hold is set to Off or Auto in the Audio Level Meter menu of the On Screen Set
View all Sony BVMF250A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Chapter 3 Menu Function Switch Menu Aspect Blanking-Black Side by Side Audio Level Meter ALM Hold Reset Time Code Difference Checkerboard Function and operation ([ ]: factory setting) Sets whether or not to set the blanking level of the Aspect Blanking (the blanking outside the area of the aspect marker) to 0% black level ([Off] or On). Notes • The Aspect Blanking is not set to 0% black level in the following cases: - When the input signal has no sync signal - When the internal signal is displayed - When the HDMI/DisplayPort computer signal is input - When H Delay/V Delay is set to On - When Side by Side is set to On - When Pixel Zoom is set to on • The Aspect Blanking may be displayed in an incorrect position when External Sync is On. Sets whether or not to display in the side by side display ([Off] or On). Note The side by side display is not set in the following cases: • When the internal signal is displayed • When Pixel Zoom is set to on Sets whether or not to display the audio level meter ([Off] or On). Note When the option port number in which the BKM-250TG is installed is not selected in Input Port of the Channel Configuration menu, the audio level meter cannot be displayed. When the item is selected, the peak hold of the audio level meter is canceled. Note The ALM Hold Reset is not selected in the following cases: • When the option slot number in which the BKM-250TG is installed is not selected in Input Port of the Channel Configuration menu • When Audio Level Meter is set to Off • When Peak Hold is set to Off or Auto in the Audio Level Meter menu of the On Screen Set menu of the System Configuration menu Sets whether or not to display the time code ([Off] or On). Sets whether or not to display the difference between the luminance of the left 3D video signal and that of the right signal ([Off] or On). This item is available for dual-stream HD-SDI signals. Notes • The Difference display cannot be set in the following cases: - When the option port number in which the BKM-250TG is installed is not selected in Input Port of the Channel Configuration menu - When dual-link display is used - When the internal signal is displayed - When a captured frame is displayed - When Side by Side is set to On • The Difference display may not be performed correctly when H Delay is set to On. • If saving is performed in HD Frame Capture, this function is deactivated and the normal display is restored. Sets whether or not to display the left and right 3D video signals in a checkerboard pattern ([Off] or On). This item is available for dual-stream HD-SDI signals. Notes • The Checkerboard display cannot be set in the following cases: - When the option port number in which the BKM-250TG is installed is not selected in Input Port of the Channel Configuration menu - When dual-link display is used - When the internal signal is displayed - When a captured frame is displayed - When Side by Side is set to On • The Checkerboard display may not be performed correctly when H Delay is set to On. • If saving is performed in HD Frame Capture, this function is deactivated and the normal display is restored. 70 Function Setting Menu