Sony BVMF250A User Manual (Operating Instructions - BVM-F250A / BVM-F170A) - Page 11
Options, For external control, For installation, Input adaptors
View all Sony BVMF250A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Chapter 1 Overview signals, as a black frame is not inserted when the two signals are switched. Horopter check display (with serial number 7100001 or higher): Either left (L) or right (R) 3D video signals, or both L and R signals are displayed in monochrome mode. This display is useful for checking a subtle depth of a subject located in the boundary plane of the screen, that is, whether it is near or far from the screen surface. Horizontal flip display (with serial number 7100001 or higher): The input 3D video signals whose left (L) or right (R) signal has been inverted horizontally by a half-mirror type 3D rig are displayed as non-inverted images. Note The horizontal flip display function of this monitor inverts the input signals to display them. Since the internal sync is applied to any signal delayed by the inversion, there is a time lag between input and the displayed image. Screen saver When a nearly still image is displayed continuously for 10 minutes or more, the screen saver starts automatically to reduce the brightness of the screen to prevent burn-in. Variable picture adjustment functions Auto chroma, phase and matrix adjustment functions are equipped. Other features • The color temperature is selectable from D65, D93 and User. • Built-in test pattern for 100% white signal, 20% gray signal, 0% black signal, PLUGE (Picture Line Up Generation Equipment) signal, color-bar signal, 5 step gray scale signal and ramp signal. • Chroma Up function that increases the chroma setting by 12 dB. • Blue only function and RGB cut off function to monitor signal noise. • A parallel remote of the contact point control connector is equipped. Options For external control BKM-16R Monitor Control Unit The BKM-16R is a controller of the BVM-F250A/F170A and you can control multiple monitors from one controller. In this manual, the BKM-16R is referred to as the controller. For installation BKM-37H/BKM-38H Controller Attachment Stand (for BVM-F250A only) Used to join a BKM-16R and the BVM-F250A. Using the BKM-37H, you can adjust the monitor angle up or down. BKM-39H Controller Attachment Stand (for BVM-F170A only) Used to join a BKM-16R and the BVM-F170A. SMF-700 Monitor Interface Cable Used to connect the BVM-F250A/F170A to the BKM16R. Input adaptors The input connector panel is composed by installing the optional input adaptor into the input option port on the monitor. Up to four adaptors can be installed to the monitor. The input signal type for each connector of the adaptor is set with the Channel Configuration menu, in accordance with the configuration of the connector panel. Note When installing the adaptor, be sure to perform the necessary input signal setup with the Channel Configuration menu. If the setup is not performed, the adaptors may not function correctly. For information about the Channel Configuration menu, see page 55. For details of each input adaptor, refer to the operating instructions of each model. BKM-220D SDI 4:2:2 Input Adaptor Includes a decoder for serial digital signals (525/625 component). Input/output connectors for two serial digital channels and output connector for one monitor channel are equipped. Options 11