Sony CDP-CE345 Operating Instructions - Page 10

Playing CDs Locating a Specific Track or a Particular Point in a Track You can quickly locate any track while playing a disc using the AMS (Automatic Music Sensor) control. You can also locate a specific point in a track while playing a disc. MUSIC SCAN H l AMS L (CDP-CE345 only) m/M To locate You need to The next or succeeding tracks Turn l AMS L clockwise until you find the track. When using the remote, press > repeatedly until you find the track. The current or preceding tracks Turn l AMS L counterclockwise until you find the track. When using the remote, press . repeatedly until you find the track. A specific track directly (CDPCE345 only) Z Press the number button of the track on the remote A track by scanning each track for 10 seconds (Music Scan) Press MUSIC SCAN before you start playing. When you find the track you want, press H to start playing. A point while Press M (forward) or m (backward) monitoring the sound and hold down until you find the point. A point quickly by observing the display during pause Press M (forward) or m (backward) and hold down until you find the point. You will not hear the sound during the operation. >10 H ./> m/M Number buttons z When you directly locate a track numbered over 10 (CDP-CE345 only) Z Press >10 first, then the corresponding number buttons on the remote. To enter "0," use button 10/0. Example: To play track number 30 Press >10 first, then 3 and 10/0. z You can extend the playing time during Music Scan Press MUSIC SCAN repeatedly until the playing time you want (10, 20 or 30) appears in the display. Each time you press the button, the playing time changes cyclically. Note If " " appears in the display, the disc has reached the end while you were pressing the M button. Press m or turn l AMS L counterclockwise to go back. 10GB