Sony CDP-CE345 Operating Instructions - Page 15

Recording From CDs 7 Reverse the tape to side B and press H or X on the player to resume playing the remaining tracks. To cancel Time Edit Press CONTINUE. z You can program the tracks you want in advance Create a program selecting the desired tracks, then follow Steps 2 to 7. Be careful that the total playing time of the program does not exceed the tape length of one side. z You can freely specify the tape length Set the tape length using the l AMS L control. Example: When the tape length of one side is 30 minutes and 15 seconds 1 To set the minutes, turn l AMS L until "30" appears in the display, then push l AMS L. 2 To set the seconds, turn l AMS L until "15" appears in the display, then push l AMS L. z You can check and change the program See page 13. Fading In or Out You can manually fade in or out to prevent tracks from starting or ending abruptly. Note that you cannot use this effect when you use the DIGITAL OUT (OPTICAL) connector. EDIT/TIME FADE HX FADER m/M To Press FADER Start play fading in During pause. "FADE" flashes, then the play fades in. End play fading out When you want to start fading out. "FADE" flashes and the play fades out. Then the player pauses. Note Fading lasts for about 5 seconds. However, when you press the FADER button during Music Scan (see page 10), the play fades out for about 2 seconds. Fading out at the specified time (Time Fade) You can have the player fade out automatically by specifying the playing time. Once you set the Time Fade, it works twice, that is, the play fades out at the end of both sides of a tape. 1 Press EDIT/TIME FADE repeatedly before you start playing until TIME FADE and A appear in the display. 2 Press m or M to specify the playing time. Each time you press these buttons, the display changes as shown below, with the playing time of one side following each indication. t C-46 y C-54 y C-60 y C-74 y C-90 y - -. - - T (23.00) (27.00) (30.00) (37.00) (45.00) (Continued) 15GB