Sony CDP-CE545 Operating Instructions - Page 19

Playing CDs To Pause Stop play Locate a disc while the second player is set to Continuous Play mode Locate a track You need to Press X Press x Turn l AMS (DISC) L until the display shows the disc number you want, then push l AMS (DISC) L Press m (-AMS+) M until the display shows the track number you want • To do other operations, use the controls on the second player or the supplied remote. • The AMS buttons (./>) and search buttons (m/M) on the remote operate the second player as indicated on the remote. To control the second player directly using the supplied remote Set CD 1/2/3 on the remote to CD 3, which is the same mode set for the second player. To control this player again Press MEGA CONTROL. The MEGA CONTROL button goes off and you can control this player. Notes • You cannot locate a particular point in a track of the second player using the controls on this player. • Some controls on this player work on the second player differently from they do to this player. Loading the Disc Names (Disc Memos) of the second CD player If the second CD player has the Disc Name (Disc Memo) function (see page 24), you can load the Disc Name (Disc Memo) of the second CD player to this player's memory and display them on this player. 1 Press MENU. 2 Turn l AMS (DISC) L until "LOAD 2ndNAME" appears in the display. ALL DISCS DISC LOAD 12345 TRACK MIN SEC 2 n d N A M E CD1 12345 6 7 8 9 10 3 Push l AMS (DISC) L. This player starts loading. (Loading takes about one minute.) Note If each Disc Name (Disc Memo) of the second CD player has more than 12 characters, the first 12 characters of each are loaded to this player. Labeling discs of the second CD player You can label discs of the second CD player or change the Disc Names (Disc Memos) loaded from the second CD player. 1 Press MEGA CONTROL. The MEGA CONTROL button lights up. 2 Press CONTINUE. 3 Turn l AMS (DISC) L to select the disc you want, then push l AMS (DISC) L. 4 Press MENU. 5 Turn l AMS (DISC) L until "DISC NAME" appears in the display, then push l AMS (DISC) L. 6 Input the new Disc Name (Disc Memo) following the procedure in "Labeling Discs" on pages 24 to 26. Note The new Disc Names (Disc Memos) are stored on this player's memory, so you cannot display them on the second CD player. 19GB