Sony CPD-100SF Operating Instructions (primary manual) - Page 7
justirk
View all Sony CPD-100SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Setting the ColorIenn rature, The selected color temperature becomes the common setting for all input signals. 1 Press COLOR button. The "COLOR TEMPERATURE" OSD appears. COLOR COLOR TEMPERATURE VARIABLE 5000K 9300K ID 50 ID 2 Adifist with the -0- 40I/ and 0 1/14- buttons. To select 5000K or 9300K Press 4/♦ buttons. The selected color temperature is indicated in yellow. . . . to select 5000K u.. . . to select 9300K To obtain the desired color temperature between 5000K and 9300K Press 0 i/j buttons. ( 0 ) n e, justirk< Data Factory-preset To reset an adjustment item Press the button of the adjustment item you want to reset, and then press the RESET button before the OSD (On Screen Display) disappears. To reset all adjustment data at once (for the received signal) Press the RESET button when no OSD is shown. RESET To reset all adjustment data to factorypreset levels Press and hold the RESET button for more than 2 seconds. All adjustment data are reset to factory-preset levels. RESET t . . . for higher temperature 4 . . . for lower temperature Your most recent adjusted color temperature will be recalled by pressing 0 'IA , button. To erase the "COLOR TEMPERATURE" OSD, press the COLOR button again. The "COLOR TEMPERATURE" OSD automatically disappears 20 seconds after you release the buttons. To reset, press the RESET button while the OSD is on. 7