Sony DCR-DVD908E User Manual - Page 20
Step 2: Charging the battery pack
View all Sony DCR-DVD908E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Step 2: Charging the battery pack 2 POWER switch 1 Battery DC IN jack 3 DC plug Jack cover AC Adaptor 4 CHG (charge) lamp Mains lead 4 To the wall socket You can charge the "InfoLITHIUM" battery pack (H series) (p. 104) after attaching it to your camcorder. b Notes • You can use only "InfoLITHIUM" battery pack H series. 1 Turn the POWER switch in the direction of the arrow to OFF (CHG) (The default setting). 2 Attach the battery pack by sliding it in the direction of the arrow until it clicks. Lift up the viewfinder and attach the battery pack by sliding it in the direction of the arrow until it clicks. 4 Connect the mains lead to the AC Adaptor and the wall socket. The CHG (charge) lamp lights up and charging starts. The CHG (charge) lamp turns off when the battery is fully charged. 5 Disconnect the AC Adaptor from the DC IN jack on your camcorder. b Notes • Disconnect the AC Adaptor from the DC IN jack holding both the camcorder and the DC plug. 3 Connect the AC Adaptor to the DC IN jack of your camcorder. Open the jack cover, and connect the DC plug of the AC Adaptor. Match the v mark on the DC plug with the v mark on your camcorder. 20