Sony DCR-DVD908E User Manual - Page 22

Playing time, Step 2: Charging the battery pack Continued

Page 22 highlights

Step 2: Charging the battery pack (Continued) DCR-DVD506E/DVD508E/DVD908E Battery pack NP-FH50 NP-FH60 (supplied) NP-FH70 NP-FH100 Continuous recording time 65 70 70 90 95 95 145 150 150 340 355 355 Typical recording time* 30 35 35 45 45 45 70 75 75 170 175 175 * Typical recording time shows the time when you repeat recording start/stop, turning the power on/off and zooming. b Notes • All times measured with recording mode [SP] under the following conditions: Top: When the LCD backlight turns on. Middle: When the LCD backlight turns off. Bottom: Recording time when recording with the viewfinder while the LCD panel is closed. Playing time Approximate time (min.) available when you use a fully charged battery pack. DCR-DVD406E/DVD408E/DVD808E Battery pack NP-FH50 NP-FH60 (supplied) NP-FH70 NP-FH100 LCD panel opened* 115 150 LCD panel closed 125 165 245 270 565 615 22 DCR-DVD506E/DVD508E/DVD908E Battery pack NP-FH50 NP-FH60 (supplied) NP-FH70 NP-FH100 LCD panel opened* 115 150 LCD panel closed 120 160 245 255 565 590 * When the LCD backlight is on. On the battery pack • Before changing the battery pack, Turn the POWER switch to OFF (CHG) and turn off the (Movie) lamp/ (Still) lamp (p. 23). • The CHG (charge) lamp flashes during charging, or Battery Info (p. 21) will not be correctly displayed under the following conditions: - The battery pack is not attached correctly. - The battery pack is damaged. - The battery pack is worn-out (For Battery Info only). • The power will not be supplied from the battery as long as the AC Adaptor is connected to the DC IN jack of your camcorder, even when the mains lead is disconnected from the wall socket. • When attaching an optional video light, it is recommended that you use an NP-FH70/NPFH100 battery pack. • We do not recommend using an NP-FH30, which only allows short recording and playback times, with your camcorder. On the charging/recording/playback time • Times measured when using the camcorder at 25 °C (77 °F) (10 °C to 30 °C (50 °F to 86 °F) is recommended). • The recording and playback time will be shorter when you use your camcorder in low temperatures. • The recording and playback time will be shorter depending on the conditions under which you use your camcorder. On the AC Adaptor • Use the nearby wall socket when using the AC Adaptor. Disconnect the AC Adaptor from the

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124

22
Step 2: Charging the battery pack (Continued)
DCR-DVD506E/DVD508E/DVD908E
*
Typical recording time shows the time when
you repeat recording start/stop, turning the
power on/off and zooming.
b
Notes
All times measured with recording mode [SP]
under the following conditions:
Top: When the LCD backlight turns on.
Middle: When the LCD backlight turns off.
Bottom: Recording time when recording with
the viewfinder while the LCD panel is closed.
Playing time
Approximate time (min.) available when
you use a fully charged battery pack.
DCR-DVD406E/DVD408E/DVD808E
DCR-DVD506E/DVD508E/DVD908E
*
When the LCD backlight is on.
On the battery pack
Before changing the battery pack, Turn the
POWER switch to OFF (CHG) and turn off the
(Movie) lamp/
(Still) lamp (p. 23).
The CHG (charge) lamp flashes during
charging, or Battery Info (p. 21) will not be
correctly displayed under the following
conditions:
The battery pack is not attached correctly.
The battery pack is damaged.
The battery pack is worn-out (For Battery
Info only).
The power will not be supplied from the battery
as long as the AC Adaptor is connected to the
DC IN jack of your camcorder, even when the
mains lead is disconnected from the wall socket.
When attaching an optional video light, it is
recommended that you use an NP-FH70/NP-
FH100 battery pack.
We do not recommend using an NP-FH30,
which only allows short recording and playback
times, with your camcorder.
On the charging/recording/playback time
Times measured when using the camcorder at
25 °C (77 °F) (10 °C to 30 °C (50 °F to 86 °F) is
recommended).
The recording and playback time will be shorter
when you use your camcorder in low
temperatures.
The recording and playback time will be shorter
depending on the conditions under which you
use your camcorder.
On the AC Adaptor
Use the nearby wall socket when using the AC
Adaptor. Disconnect the AC Adaptor from the
Battery pack
Continuous
recording
time
Typical
recording
time*
NP-FH50
65
30
70
35
70
35
NP-FH60
(supplied)
90
45
95
45
95
45
NP-FH70
145
70
150
75
150
75
NP-FH100
340
170
355
175
355
175
Battery pack
LCD panel
opened*
LCD panel
closed
NP-FH50
115
125
NP-FH60
(supplied)
150
165
NP-FH70
245
270
NP-FH100
565
615
Battery pack
LCD panel
opened*
LCD panel
closed
NP-FH50
115
120
NP-FH60
(supplied)
150
160
NP-FH70
245
255
NP-FH100
565
590