Sony DCR-DVD908E User Manual - Page 21

To remove the battery pack 1 Turn the POWER switch to OFF (CHG). 2 Raise the viewfinder. 3 Press the BATT (battery) release button and remove the battery pack. BATT (battery) release button pressing DISP/BATT INFO again while the information is displayed. Remaining battery (approx.) Getting Started b Notes • When you remove the battery pack or the AC Adaptor, make sure that the (Movie) lamp/ (Still) lamp (p. 23) is turned off. When storing the battery pack Fully discharge the battery before storing it for an extended period. To use an outside power source Make the same connections as you do when charging the battery pack. The battery pack will not lose its charge in this case. To check the remaining battery (Battery Info) Set the POWER switch to OFF (CHG), then press DISP/BATT INFO. After a while, the approximate recordable time and battery information appear for about 7 seconds. You can view the battery information for up to 20 seconds by Recording capacity (approx.) Charging time Approximate time (min.) required when you fully charge a fully discharged battery pack. Battery pack NP-FH50 NP-FH60 (supplied) NP-FH70 NP-FH100 Charging time 135 135 170 390 Recording time Approximate time (min.) available when you use a fully charged battery pack. DCR-DVD406E/DVD408E/DVD808E Battery pack NP-FH50 NP-FH60 (supplied) NP-FH70 NP-FH100 Continuous recording time Typical recording time* 80 40 80 40 80 40 105 50 110 55 110 55 170 85 180 90 180 90 395 195 415 205 415 205 Continued , 21