Sony DCR-DVD908E User Manual - Page 35
Recording high quality still images during movie recording (Dual Rec), Recording/Playback
View all Sony DCR-DVD908E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Recording/Playback Press (flash) repeatedly to select an appropriate setting. No indication (Auto flash): Automatically flashes when there is insufficient ambient light. r (Forced flash): Always uses the flash regardless of the surrounding brightness. r (No flash): Records without flash. b Notes • The recommended distance to the subject when using the built-in flash is approximately 0.3 to 2.5 m (1 to 8 feet). • Remove any dust from the surface of the flash lamp before using it. Flash effect may be impaired if heat discoloration or dust obscures the lamp. • The flash charge lamp flickers while charging the flash, and remains lit when the battery charge is complete. • If you use the flash in bright places such as when shooting a backlit subject, the flash may not be effective. • When attaching a conversion lens (optional) or a filter (optional) to your camcorder, the flash light does not emit light. z Tips • You can change the brightness of the flash by setting [FLASH LEVEL] (p. 65), or you can prevent the redeye by setting [REDEYE REDUC] (p. 66). Recording high quality still images during movie recording (Dual Rec) You can record high quality still images on the "Memory Stick Duo" while recording a movie on the disc. 1 Set the POWER switch to (Movie), and press START/STOP to start movie recording. 2 Press PHOTO fully. After you start recording, and before you finish, you can capture up to 3 frames of still images from your movie. Orange color boxes indicate the number of recorded images. When recording is finished, the color changes to orange. 3 Press START/STOP to stop movie recording. Stored still images appear one by one, and the images are stored onto the "Memory Stick Duo." When disappears, the image has been recorded. b Notes • Do not eject the "Memory Stick Duo" before recording is finished and the still images are stored on the "Memory Stick Duo." • You cannot use the flash during Dual Rec. z Tips • When the POWER switch is set to (Movie), the size of still images becomes 4.6M (16:9 wide) or 3.4M (4:3) (DCRDVD506E/DVD508E/DVD908E). • When the POWER switch is set to (Movie), the size of still images becomes 2.3M (16:9 wide) or 1.7M (4:3) (DCRDVD406E/DVD408E/DVD808E). • You can record still images during recording standby in the same way as when the POWER switch is set to (Still). You can also record with the flash. Continued , 35