Sony DCR-DVD908E User Manual - Page 65
Steadyshot, Auto Slw Shuttr, Guideframe, Zebra, Remaining, Sub-t Date, Flash Level
View all Sony DCR-DVD908E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
STEADYSHOT You can compensate for camera shake (the default setting is [ON]). Set [STEADYSHOT] to [OFF] ( ) when using a tripod (optional), then the image becomes natural. AUTO SLW SHUTTR (Auto slow shutter) When this is set to [ON] (the default setting), the shutter speed is automatically reduced to 1/25 second when recording in dark conditions. GUIDEFRAME You can display the frame and check that the subject is horizontal or vertical by setting [GUIDEFRAME] to [ON]. The frame is not recorded. Press DISP/ BATT INFO to make the frame disappear. z Tips • Positioning the subject at the cross point of the guide frame makes a balanced composition. ZEBRA Diagonal stripes appear in portions of the screen where brightness is at a preset level. This is useful as a guide when adjusting the brightness. When you change the default setting, is displayed. The zebra pattern is not recorded. B OFF The zebra pattern is not displayed. 70 The zebra pattern appears at a screen brightness level of about 70 IRE. 100 The zebra pattern appears at a screen brightness level of about 100 IRE or higher. b Notes • Portions of the screen where brightness is about 100 IRE or above may appear overexposed. z Tips • IRE represents the screen brightness level. REMAINING B AUTO Displays the remaining disc indicator for about 8 seconds in situations such as those described below. - When your camcorder recognizes the remaining disc capacity with the POWER switch set to (Movie). - When you press DISP/BATT INFO to switch the indicator from off to on with the POWER switch set to (Movie). - When you select the movie recording mode on the HOME MENU. ON Always displays the remaining disc indicator. b Notes • When the remaining recordable time for movies is less than 5 minutes, the indicator stays on the screen. SUB-T DATE Select [ON] (the default setting) to display the recording date and time when you play back a disc on a device with a subtitle display function. Also refer to the instruction manual of the playback device. FLASH LEVEL You can set this function when you use the built-in flash, or an external flash (optional) that is compatible with your camcorder. HIGH ( ) Makes the flash level higher. B NORMAL ( ) Continued , 65 Customizing your camcorder