Sony DCRHC21 Operating Guide - Page 66
Recording, Adjusting the image during recording, The external flash optional does not work.
UPC - 027242669819
View all Sony DCRHC21 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Recording Refer also to "Adjusting the image during recording" (p. 66). The tape does not start when you press REC START/STOP. • Slide the POWER switch down to turn on the CAMERA lamp (p. 18, 20). • The tape has reached the end. Rewind it, or insert a new cassette. • Set the write-protect tab to REC or insert a new cassette (p. 78). • The tape is stuck to the drum due to moisture condensation. Remove the cassette and leave your camcorder for at least 1 hour, then re-insert the cassette (p. 82). You cannot record a smooth transition on a tape from the last recorded scene to the next. • Note the following. - Perform END SEARCH (p. 26). - Do not remove the cassette. (The picture will be recorded continuously without a break even when you turn the power off.) - Do not record pictures in SP mode and LP mode on the same tape. - Avoid stopping then recording a movie in the LP mode. The shutter sound is not heard when you record a still image. • Set [BEEP] to [ON] (p. 46). The external flash (optional) does not work. • The power of the flash is not turned on, or the flash is not attached correctly. • Two or more flashes are attached. Only one external flash can be attached. [END SCH] does not work. • The cassette was ejected after recording (p. 26). • The cassette is new and has nothing recorded. [END SCH] does not work correctly. • There is a blank section in the beginning or middle of the tape. This is not a malfunction. Adjusting the image during recording Refer also to "Menu" (p. 69). The auto focus does not function. • Set [FOCUS] to [ AUTO] (p. 32). • The recording conditions are not suitable for auto focus. Adjust the focus manually (p. 32). 66