Sony DCRSR42 Operating Guide - Page 11

Step 2: Charging the battery pack Getting Started POWER switch Battery pack CHG lamp DC IN jack DC plug AC Adaptor Power cord To the wall outlet You can charge the "InfoLITHIUM" battery pack (H series) after attaching it to your camcorder. • Your camcorder operates only with an "InfoLITHIUM" battery pack (H series). 1 Attach the battery pack by sliding it in the direction of the arrow until it clicks. 5 Set the camcorder onto the Handycam Station securely. The CHG (charge) lamp lights up and charging starts. The CHG (charge) lamp turns off when the battery pack is fully charged. Remove the camcorder from the Handycam Station. 2 Turn the POWER switch in the direction of the arrow to OFF (CHG) (The default setting). 3 Connect the AC Adaptor to the DC IN jack on the Handycam Station. Be sure that the v mark on the DC plug is facing up. To remove the battery pack Turn the POWER switch to OFF (CHG). Slide the BATT (battery) release lever and remove the battery pack. BATT (battery) release lever 4 Connect the power cord to the AC Adaptor and the wall outlet. • When you remove the battery pack or the AC Adaptor, make sure that the (Movie) lamp/ (Still) lamp (p.13) is turned off. 11